Centrifugal Pumps

The operating principal of the centrifugal pump is one of the most common principals and can be deployed in situation where thin liquids of up to a viscosity of approx. 300 mPa.s. have to be pumped.

There are many different types of impellers including: closed impellers, half open impellers, entirely open impellers, recessed impellers, peripheral impellers and side entry impellers. Each impeller type has its own specific characteristics.
 

A distinction is also made between standard-priming and self-priming centrifugal pumps. In both cases the impeller must always be below the water level, however, self-priming centrifugal pumps are better for air processing and are often constructed so that liquid remains in the pump house so the pumps can be stationed above the level of the liquid.
 

A critical point for centrifugal pumps is always their mechanical seal. These are made in various versions. For chemically aggressive liquids a magnet driven pump is often selected which are hermetically sealed from the atmospere.
 

  • S  pump series in uncoupled axle

    Self-priming waste water centrifugal pumps with bearing unit in uncoupled axle.

    • Max. power: 55 kW
    • Max. capacity: 1440 m3/hr
    • Max. capacity: 24000 l/min
    • Max. capacity: 1440000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 80 mm
    •  

    More information

  • S pump series Diesel

    Self-priming cast-iron waste water centrifugal pumps with diesel motor.

    • Max. power: 55 kW
    • Max. capacity: 1440 m3/hr
    • Max. capacity: 24000 l/min
    • Max. capacity: 1440000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 80 mm
    •  

    More information

  • RS pump series with recessed impeller

    Stainless steel AISI 316 centrifugal pumps with recessed impeller.

    • Max. power: 15 kW
    • Max. capacity: 90 m3/hr
    • Max. capacity: 1500 l/min
    • Max. capacity: 90000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 40 mm
    •  

    More information

  • HG pump series with open impeller

    Stainless steel AISI 316 centrifugal pumps with open impeller.

    • Max. power: 55 kW
    • Max. capacity: 250 m3/hr
    • Max. capacity: 4167 l/min
    • Max. capacity: 250000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    •  

    More information

  • HD pump series with closed impeller

    Stainless steel AISI 316 centrifugal pumps with closed impeller.

    • Max. power: 55 kW
    • Max. capacity: 250 m3/hr
    • Max. capacity: 4167 l/min
    • Max. capacity: 250000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    •  

    More information

  • RC pump series with recessed impeller

    Centrifugal pumps with recessed impeller.

    • Max. power: 55 kW
    • Max. capacity: 350 m3/hr
    • Max. capacity: 5833 l/min
    • Max. capacity: 350000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 115 mm
    •  

    More information

  • PC pump serie

    Pumps in free shaft version with bearing block on fundation for waste- and processwater.

    • Max. power: 200 kW
    • Max. capacity: 1500 m3/hr
    • Max. capacity: 25000 l/min
    • Max. capacity: 1500000 l/hr
    • Max. discharge head: 95 m
    • Max. pressure: 10 bar
    • Max. drainage: 180 mm
    •  

    More information

  • RB pump series with channel impeller

    Centrifugal pumps with channel impeller.

    • Max. power: 110 kW
    • Max. capacity: 1200 m3/hr
    • Max. capacity: 20000 l/min
    • Max. capacity: 1200000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 40 mm
    •  

    More information

  • RG pump series

    Stainless steel AISI 316 centrifugal pumps with open impeller for chemical applications compliant with DIN 24256/ ISO 2858.

    • Max. power: 75 kW
    • Max. capacity: 300 m3/hr
    • Max. capacity: 5000 l/min
    • Max. capacity: 300000 l/hr
    • Max. discharge head: 100 m
    • Max. pressure: 10 bar
    •  

    More information

  • CM MAG-P pump series

    Magnetic drive synthetic centrifugal pumps.

    • Max. power: 4 kW
    • Max. capacity: 35 m3/hr
    • Max. capacity: 583 l/min
    • Max. capacity: 35000 l/hr
    • Max. discharge head: 24 m
    • Max. pressure: 2 bar
    •  

    More information

  • CM MAG-M pump series

    Magnetic drive metal centrifugal pumps.

    • Max. power: 5,5 kW
    • Max. capacity: 35 m3/hr
    • Max. capacity: 583 l/min
    • Max. capacity: 35000 l/hr
    • Max. discharge head: 35 m
    • Max. pressure: 4 bar
    •  

    More information

  • C MAG-PL pump series

    Magnet driven centrifugal pumps with a plastic lining.

    • Max. power: 18,5 kW
    • Max. capacity: 130 m3/hr
    • Max. capacity: 1500 l/min
    • Max. capacity: 90000 l/hr
    • Max. discharge head: 44 m
    • Max. pressure: 4 bar
    • Speed: 2900 rpm
    •  

    More information

  • CL MAG-M pump series

    Magnet driven centrifugal pumps with a plastic lining.

    • Max. power: 15 kW
    • Max. capacity: 90 m3/hr
    • Max. capacity: 1500 l/min
    • Max. capacity: 90000 l/hr
    • Max. discharge head: 63 m
    • Max. pressure: 6 bar
    • Speed: 2900 rpm
    •  

    More information

  • GV / GVF pump series

    Self-priming plastic magnetic drive centrifugal pumps.

    • Max. power: 3,7 kW
    • Max. capacity: 27 m3/hr
    • Max. capacity: 450 l/min
    • Max. capacity: 27000 l/hr
    • Max. discharge head: 26 m
    • Max. pressure: 3 bar
    •  

    More information

  • ARBO Sealpro pump series

    Horizontal plastic chemical centrifugal pumps with shaft seal.

    • Max. power: 5,5 kW
    • Max. capacity: 45 m3/hr
    • Max. capacity: 750 l/min
    • Max. capacity: 45000 l/hr
    • Max. discharge head: 37 m
    • Max. drainage: 2 mm
    •  

    More information

  • ARBO HD-KR / TK pump series

    Plastic chemical standard centrifugal pumps with shaft seal according to ISO 2858.

    • Max. power: 75 kW
    • Max. capacity: 750 m3/hr
    • Max. capacity: 12500 l/min
    • Max. capacity: 750000 l/hr
    • Max. discharge head: 90 m
    • Max. pressure: 9 bar
    • Max. drainage: 3 mm
    •  

    More information

  • CL SEAL-M ISO pump series

    Centrifugal pumps with plastic lining follow ISO 2858 -. ISO 5199 Mechanical seal chamber according to ISO 3069 / UNI EN 12756.

    • Max. power: 75 kW
    • Max. capacity: 340 m3/hr
    • Max. capacity: 5667 l/min
    • Max. capacity: 340000 l/hr
    • Max. discharge head: 86 m
    • Max. pressure: 9 bar
    •  

    More information

  • T MAG-P pump series

    Magnet-driven plastic centrifugal pumps with a peripheral impeller.

    • Max. power: 9,2 kW
    • Max. capacity: 13 m3/hr
    • Max. capacity: 217 l/min
    • Max. capacity: 13000 l/hr
    • Max. discharge head: 53 m
    • Max. pressure: 5 bar
    •  

    More information

  • T MAG-PM pump series

    Magnet-driven plastic centrifugal pumps with a peripheral fan.

    • Max. power: 5,5 kW
    • Max. capacity: 13 m3/hr
    • Max. capacity: 217 l/min
    • Max. capacity: 13000 l/hr
    • Max. discharge head: 53 m
    • Max. pressure: 5 bar
    • Speed: 2900 rpm
    •  

    More information

  • T MAG-M pump series

    Magnet-driven, metal centrifugal pumps with a peripheral impeller.

    • Max. power: 30 kW
    • Max. capacity: 12 m3/hr
    • Max. capacity: 200 l/min
    • Max. capacity: 12000 l/hr
    • Max. discharge head: 164 m
    • Max. pressure: 16 bar
    • Speed: 2900 rpm
    •  

    More information

  • CT MAG-M pump series

    Magnetic drive metal centrifugal pumps with peripheral impeller.

    • Max. power: 75 kW
    • Max. capacity: 25 m3/hr
    • Max. capacity: 417 l/min
    • Max. capacity: 25000 l/hr
    • Max. discharge head: 310 m
    • Max. pressure: 31 bar
    •  

    More information

  • SCP pump series

    Chemical process pumps that comply with EN 22858 / ISO 2858.

    • Max. power: 500 kW
    • Max. capacity: 1800 m3/hr
    • Max. capacity: 10000 l/min
    • Max. capacity: 600000 l/hr
    • Max. discharge head: 170 m
    • Max. pressure: 17 bar
    •  

    More information

  • CN MAG-M pump series

    Magnetic drive metal centrifugal pumps compliant with ISO 2858/DIN 24256.

    • Max. power: 1000 kW
    • Max. capacity: 900 m3/hr
    • Max. capacity: 15000 l/min
    • Max. capacity: 900000 l/hr
    • Max. discharge head: 150 m
    • Max. pressure: 15 bar
    •  

    More information

  • CN MAG-M API pump series

    Magnetic drive metal centrifugal pumps compliant with API 685.

    • Max. power: 320 kW
    • Max. capacity: 1000 m3/hr
    • Max. capacity: 16667 l/min
    • Max. capacity: 1000000 l/hr
    • Max. discharge head: 220 m
    • Max. pressure: 22 bar
    •  

    More information

  • Habermann HPK pump series

    The HPK series with internal lining are used for pumping abrasive / corrosive liquids.

    • Max. capacity: 4600 m3/hr
    • Max. capacity: 76667 l/min
    • Max. capacity: 4600 l/hr
    • Max. discharge head: 70 m
    • Max. pressure: 7 bar
    •  

    More information

  • Habermann NPK pump series

    The NPK series is used for pumping very abrasive liquids.

    • Max. capacity: 4600 m3/hr
    • Max. capacity: 76667 l/min
    • Max. capacity: 4600 l/hr
    • Max. discharge head: 95 m
    • Max. pressure: 9,5 bar
    • Max. drainage: 100 mm
    •  

    More information

  • Habermann NPW pump series

    Pumps specially for industrial sludge applications.

    • Max. capacity: 4600 m3/hr
    • Max. capacity: 76,666 l/min
    • Max. capacity: 4600 l/hr
    • Max. discharge head: 70 m
    • Max. pressure: 7 bar
    •  

    More information

  • ECO SKY pump series

    Thermal oil pumps with bearing unit on base plate and B3 motor.

    • Max. power: 110 kW
    • Max. capacity: 500 m3/hr
    • Max. capacity: 8333 l/min
    • Max. capacity: 500000 l/hr
    • Max. discharge head: 105 m
    • Max. pressure: 10 bar
    •  

    More information

  • CP pump series

    Stainless steel AISI 316 Peripheral impeller pump.

    • Max. power: 4 kW
    • Max. capacity: 6 m3/hr
    • Max. capacity: 100 l/min
    • Max. capacity: 6000 l/hr
    • Max. discharge head: 77 m
    • Speed: 2900 rpm
    •  

    More information

  • CV pump series

    Stainless steel AISI 316 multi-stage high pressure centrifugal pumps.

    • Max. power: 25 kW
    • Max. capacity: 100 m3/hr
    • Max. capacity: 1667 l/min
    • Max. capacity: 100000 l/hr
    • Max. discharge head: 80 m
    • Max. pressure: 8 bar
    • Speed: 2900 rpm
    •  

    More information

  • CN serie

    Stainless steel hygienic centrifugalpumps with open impeller

    • Max. capacity: 75 m3/hr
    • Max. capacity: 1250 l/min
    • Max. capacity: 75000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    •  

    More information

  • CNH pump series

    Stainless steel AISI 316 selfpriming centrifugalpumps with open impeller.

    • Max. capacity: 60 m3/hr
    • Max. capacity: 1000 l/min
    • Max. capacity: 60000 l/hr
    • Max. discharge head: 70 m
    • Max. pressure: 7 bar
    •  

    More information

  • CLC pump series

    Stainless steel AISI 316 sanitary centrifugal pumps with closed impellers.

    • Max. power: 15 kW
    • Max. capacity: 90 m3/hr
    • Max. capacity: 1500 l/min
    • Max. capacity: 90000 l/hr
    • Max. discharge head: 50 m
    • Max. pressure: 5 bar
    •  

    More information