Centrifugal Pumps

The operating principal of the centrifugal pump is one of the most common principals and can be deployed in situation where thin liquids of up to a viscosity of approx. 150 mPa.s. have to be pumped.

There are many different types of impellers including: closed impellers, half open impellers, entirely open impellers, recessed impellers, peripheral impellers and side entry impellers. Each impeller type has its own specific characteristics.
 

A distinction is also made between standard-priming and self-priming centrifugal pumps. In both cases the impeller must always be below the water level, however, self-priming centrifugal pumps are better for air processing and are often constructed so that liquid remains in the pump house so the pumps can be stationed above the level of the liquid.
 

A critical point for centrifugal pumps is always their mechanical seal. These are made in various versions. For chemically aggressive liquids a magnet driven pump is often selected which are hermetically sealed from the atmospere.
 

  • CT 61 series

    Close-coupled centrifugal pumps with peripheral impeller.

    • Max. power: 0,33 kW
    • Max. capacity: 2,3 m3/hr
    • Max. capacity: 38 l/min
    • Max. capacity: 2300 l/hr
    • Max. discharge head: 41 m
    • Max. pressure: 4 bar
    •  

    More information

  • CA series

    Self-priming water ring pumps

    • Max. power: 0,75 kW
    • Max. capacity: 2,4 m3/hr
    • Max. capacity: 40 l/min
    • Max. capacity: 2400 l/hr
    • Max. discharge head: 53 m
    • Max. pressure: 5 bar
    • Speed: 2900 rpm
    •  

    More information

  • ECC Jet series

    Self-priming jet pumps in 12 or 24 Volt DC.

    • Max. power: 0,51 kW
    • Max. capacity: 3,6 m3/hr
    • Max. capacity: 60 l/min
    • Max. capacity: 3600 l/hr
    • Max. discharge head: 35 m
    • Max. pressure: 4 bar
    • Speed: 2900 rpm
    •  

    More information

  • T en TP series

    Close-coupled centrifugal pumps with peripheral impeller.

    • Max. power: 7,5 kW
    • Max. capacity: 6 m3/hr
    • Max. capacity: 100 l/min
    • Max. capacity: 6000 l/hr
    • Max. discharge head: 165 m
    • Max. pressure: 17 bar
    • Speed: 2900 rpm
    •  

    More information

  • MGP series

    Cast-iron horizontal multi-stage centrifugal pumps.

    • Max. power: 0,55 kW
    • Max. capacity: 7,2 m3/hr
    • Max. capacity: 120 l/min
    • Max. capacity: 7200 l/hr
    • Max. discharge head: 38 m
    • Max. pressure: 4 bar
    •  

    More information

  • MXP series

    Stainless steel AISI 304 multi-stage centrifugal pumps.

    • Max. power: 0,75 kW
    • Max. capacity: 7,2 m3/hr
    • Max. capacity: 120 l/min
    • Max. capacity: 7200 l/hr
    • Max. discharge head: 46 m
    • Max. pressure: 5 bar
    • Speed: 2900 rpm
    •  

    More information

  • MXA series

    Self-priming multi-stage centrifugal pumps

    • Max. power: 1,1 kW
    • Max. capacity: 8 m3/hr
    • Max. capacity: 133 l/min
    • Max. capacity: 8000 l/hr
    • Max. discharge head: 56 m
    • Max. pressure: 6 bar
    • Speed: 2900 rpm
    •  

    More information

  • MPSU series

    Vertical multi-stage centrifugal pumps with water-cooled motors.

    • Max. power: 1,5 kW
    • Max. capacity: 8 m3/hr
    • Max. capacity: 133 l/min
    • Max. capacity: 8000 l/hr
    • Max. discharge head: 70 m
    • Max. pressure: 7 bar
    • Speed: 2900 rpm
    •  

    More information

  • NGX series

    Self-priming jet pumps in stainless steel AISI 304.

    • Max. power: 1,5 kW
    • Max. capacity: 8,4 m3/hr
    • Max. capacity: 140 l/min
    • Max. capacity: 8400 l/hr
    • Max. discharge head: 61 m
    • Max. pressure: 6 bar
    • Speed: 2900 rpm
    •  

    More information

  • NG series

    Self-priming jet pumps in cast iron

    • Max. power: 2,2 kW
    • Max. capacity: 9,5 m3/hr
    • Max. capacity: 158 l/min
    • Max. capacity: 9500 l/hr
    • Max. discharge head: 89 m
    • Max. pressure: 9 bar
    • Speed: 2900 rpm
    •  

    More information

  • 2CDX series

    Horizontal centrifugal pumps in stainless steel AISI 304 with 2 impellers.

    • Max. power: 4 kW
    • Max. capacity: 12 m3/hr
    • Max. capacity: 200 l/min
    • Max. capacity: 12000 l/hr
    • Max. discharge head: 73 m
    • Max. pressure: 7 bar
    • Speed: 2900 rpm
    •  

    More information

  • T MAG-M series

    Magnet-driven, metal centrifugal pumps with a peripheral fan.

    • Max. power: 30 kW
    • Max. capacity: 12 m3/hr
    • Max. capacity: 200 l/min
    • Max. capacity: 12000 l/hr
    • Max. discharge head: 164 m
    • Max. pressure: 16 bar
    • Speed: 2900 rpm
    •  

    More information

  • T MAG-PM series

    Magnet-driven plastic centrifugal pumps with a peripheral fan.

    • Max. power: 5,5 kW
    • Max. capacity: 13 m3/hr
    • Max. capacity: 217 l/min
    • Max. capacity: 13000 l/hr
    • Max. discharge head: 53 m
    • Max. pressure: 5 bar
    • Speed: 2900 rpm
    •  

    More information

  • T MAG-P series

    Magnet-driven plastic centrifugal pumps with a peripheral impeller.

    • Max. power: 9,2 kW
    • Max. capacity: 13 m3/hr
    • Max. capacity: 217 l/min
    • Max. capacity: 13000 l/hr
    • Max. discharge head: 53 m
    • Max. pressure: 5 bar
    •  

    More information

  • MXHL series

    Stainless steel AISI 316 multi-stage centrifugal pumps.

    • Max. power: 1,8 kW
    • Max. capacity: 13 m3/hr
    • Max. capacity: 217 l/min
    • Max. capacity: 13000 l/hr
    • Max. discharge head: 68,5 m
    • Max. pressure: 7 bar
    • Speed: 2900 rpm
    •  

    More information

  • MXV series 25-2, 32-4, 40-8

    Vertical multi-stage centrifugal pumps with standard motors.

    • Max. power: 7,5 kW
    • Max. capacity: 13 m3/hr
    • Max. capacity: 217 l/min
    • Max. capacity: 13000 l/hr
    • Max. discharge head: 225 m
    • Max. pressure: 23 bar
    •  

    More information

  • C series

    Close-coupled centrifugal pumps with open impeller.

    • Max. power: 1,1 kW
    • Max. capacity: 15 m3/hr
    • Max. capacity: 250 l/min
    • Max. capacity: 15000 l/hr
    • Max. discharge head: 22 m
    • Max. pressure: 2 bar
    • Max. drainage: 4 mm
    • Speed: 2900 rpm
    •  

    More information

  • CDX series

    Stainless steel AISI 304 centrifugal pumps.

    • Max. power: 1,8 kW
    • Max. capacity: 15 m3/hr
    • Max. capacity: 250 l/min
    • Max. capacity: 15000 l/hr
    • Max. discharge head: 38 m
    • Max. pressure: 4 bar
    • Speed: 2900 rpm
    •  

    More information

  • SPA series

    Synthetic standard-priming centrifugal pumps.

    • Max. power: 1,1 kW
    • Max. capacity: 18 m3/hr
    • Max. capacity: 300 l/min
    • Max. capacity: 18000 l/hr
    • Max. discharge head: 17 m
    • Max. pressure: 2 bar
    • Speed: 2900 rpm
    •  

    More information

  • NMD series

    Close-coupled centrifugal pumps with 2 impellers.

    • Max. power: 9,2 kW
    • Max. capacity: 24 m3/hr
    • Max. capacity: 400 l/min
    • Max. capacity: 24000 l/hr
    • Max. discharge head: 114 m
    • Max. pressure: 11 bar
    • Speed: 2900 rpm
    •  

    More information

  • MXH / MXH EI series

    Stainless steel AISI 304 multi-stage centrifugal pumps.

    • Max. power: 4 kW
    • Max. capacity: 25 m3/hr
    • Max. capacity: 417 l/min
    • Max. capacity: 25000 l/hr
    • Max. discharge head: 68,5 m
    • Max. pressure: 7 bar
    • Speed: 2900 rpm
    •  

    More information

  • MVX-B series

    Vertical multi-stage close-coupled centrifugal pumps.

    • Max. power: 7,5 kW
    • Max. capacity: 25 m3/hr
    • Max. capacity: 417 l/min
    • Max. capacity: 25000 l/hr
    • Max. discharge head: 120 m
    • Max. pressure: 12 bar
    • Speed: 2900 rpm
    •  

    More information

  • CT MAG-M series

    Magnetic drive metal centrifugal pumps with peripheral impeller.

    • Max. power: 75 kW
    • Max. capacity: 25 m3/hr
    • Max. capacity: 417 l/min
    • Max. capacity: 25000 l/hr
    • Max. discharge head: 310 m
    • Max. pressure: 31 bar
    •  

    More information

  • GV / GVF series

    Self-priming plastic magnetic drive centrifugal pumps.

    • Max. power: 3,7 kW
    • Max. capacity: 27 m3/hr
    • Max. capacity: 450 l/min
    • Max. capacity: 27000 l/hr
    • Max. discharge head: 26 m
    • Max. pressure: 3 bar
    •  

    More information

  • Matrix series

    Stainless steel AISI 304 multi-stage centrifugal pumps.

    • Max. power: 4 kW
    • Max. capacity: 27 m3/hr
    • Max. capacity: 450 l/min
    • Max. capacity: 27000 l/hr
    • Max. discharge head: 97 m
    • Max. pressure: 10 bar
    •  

    More information

  • CM MAG-P series

    Magnetic drive synthetic centrifugal pumps.

    • Max. power: 4 kW
    • Max. capacity: 35 m3/hr
    • Max. capacity: 583 l/min
    • Max. capacity: 35000 l/hr
    • Max. discharge head: 24 m
    • Max. pressure: 2 bar
    •  

    More information

  • CM MAG-M series

    Magnetic drive metal centrifugal pumps.

    • Max. power: 5,5 kW
    • Max. capacity: 35 m3/hr
    • Max. capacity: 583 l/min
    • Max. capacity: 35000 l/hr
    • Max. discharge head: 35 m
    • Max. pressure: 4 bar
    •  

    More information

  • MPC series

    Self-priming synthetic swimming pool pumps with removable hair filter.

    • Max. power: 2,2 kW
    • Max. capacity: 40 m3/hr
    • Max. capacity: 667 l/min
    • Max. capacity: 40000 l/hr
    • Max. discharge head: 18 m
    • Max. pressure: 2 bar
    • Speed: 2900 rpm
    •  

    More information

  • ARBO Sealpro series

    Horizontal plastic chemical centrifugal pumps with shaft seal.

    • Max. power: 5,5 kW
    • Max. capacity: 45 m3/hr
    • Max. discharge head: 37 m
    • Max. drainage: 2 mm
    •  

    More information

  • DWC series

    Centrifugal pumps in stainless steel AISI 304 with closed impeller.

    • Max. power: 3 kW
    • Max. capacity: 45 m3/hr
    • Max. capacity: 750 l/min
    • Max. capacity: 45000 l/hr
    • Max. discharge head: 25 m
    • Max. pressure: 3 bar
    • Speed: 2900 rpm
    •  

    More information

  • MXV series AISI 316

    Vertical multi-stage centrifugal pumps in stainless steel AISI 316L with standard motors.

    • Max. power: 22 kW
    • Max. capacity: 60 m3/hr
    • Max. capacity: 1000 l/min
    • Max. capacity: 60000 l/hr
    • Max. discharge head: 245 m
    • Max. pressure: 25 bar
    •  

    More information

  • DWO series

    Centrifugal pumps in stainless steel AISI 304 with open impellers.

    • Max. power: 3 kW
    • Max. capacity: 66 m3/hr
    • Max. capacity: 1100 l/min
    • Max. capacity: 66000 l/hr
    • Max. discharge head: 18 m
    • Max. pressure: 2 bar
    • Max. drainage: 19 mm
    • Speed: 2900 rpm
    •  

    More information

  • A series

    Self-priming waste water centrifugal pumps.

    • Max. power: 7,5 kW
    • Max. capacity: 66 m3/hr
    • Max. capacity: 1100 l/min
    • Max. capacity: 66000 l/hr
    • Max. discharge head: 35 m
    • Max. pressure: 4 bar
    • Max. drainage: 15 mm
    • Speed: 2900 rpm
    •  

    More information