Centrifugal Pumps

The operating principal of the centrifugal pump is one of the most common principals and can be deployed in situation where thin liquids of up to a viscosity of approx. 150 mPa.s. have to be pumped.

There are many different types of impellers including: closed impellers, half open impellers, entirely open impellers, recessed impellers, peripheral impellers and side entry impellers. Each impeller type has its own specific characteristics.
 

A distinction is also made between standard-priming and self-priming centrifugal pumps. In both cases the impeller must always be below the water level, however, self-priming centrifugal pumps are better for air processing and are often constructed so that liquid remains in the pump house so the pumps can be stationed above the level of the liquid.
 

A critical point for centrifugal pumps is always their mechanical seal. These are made in various versions. For chemically aggressive liquids a magnet driven pump is often selected which are hermetically sealed from the atmospere.
 

  • NM pump series

    Close-coupled centrifugal pumps.

    • Max. power: 4 kW
    • Max. capacity: 66 m3/hr
    • Max. capacity: 1100 l/min
    • Max. capacity: 66000 l/hr
    • Max. discharge head: 59 m
    • Max. pressure: 6 bar
    •  

    More information

  • MXH 32. 48 pump series

    Stainless steel AISI 304 multi-stage centrifugal pumps.

    • Max. power: 7,5 kW
    • Max. capacity: 66 m3/hr
    • Max. capacity: 1100 l/min
    • Max. capacity: 66000 l/hr
    • Max. discharge head: 74 m
    • Max. pressure: 7 bar
    • Speed: 2900 rpm
    •  

    More information

  • Circulators

    Circulators for heating and conditioning.

    • Max. capacity: 78 m3/hr
    • Max. capacity: 1300 l/min
    • Max. capacity: 78000 l/hr
    • Max. discharge head: 13 m
    • Max. pressure: 1 bar
    •  

    More information

  • MXV pump series 50-15, 50-20, 65-32 en 80-48

    Vertical multi-stage centrifugal pumps with standard motors.

    • Max. power: 45 kW
    • Max. capacity: 85 m3/hr
    • Max. capacity: 1417 l/min
    • Max. capacity: 85000 l/hr
    • Max. discharge head: 275 m
    • Max. pressure: 28 bar
    •  

    More information

  • RS pump series with recessed impeller

    Stainless steel AISI 316 centrifugal pumps with recessed impeller.

    • Max. power: 15 kW
    • Max. capacity: 90 m3/hr
    • Max. capacity: 1500 l/min
    • Max. capacity: 90000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 40 mm
    •  

    More information

  • CL MAG-M pump series

    Magnet driven centrifugal pumps with a plastic lining.

    • Max. capacity: 90 m3/hr
    • Max. capacity: 1500 l/min
    • Max. capacity: 90000 l/hr
    • Max. discharge head: 63 m
    • Max. pressure: 6 bar
    • Speed: 2900 rpm
    •  

    More information

  • EVMS pump series

    Vertical multi-stage centrifugal pumps with normalized motors.

    • Max. power: 18,5 kW
    • Max. capacity: 100 m3/hr
    • Max. capacity: 1666,67 l/min
    • Max. capacity: 100000 l/hr
    • Max. discharge head: 300 m
    • Max. pressure: 30 bar
    •  

    More information

  • CV pump series

    Stainless steel AISI 316 multi-stage high pressure centrifugal pumps.

    • Max. power: 25 kW
    • Max. capacity: 100 m3/hr
    • Max. capacity: 1667 l/min
    • Max. capacity: 100000 l/hr
    • Max. discharge head: 80 m
    • Max. pressure: 8 bar
    • Speed: 2900 rpm
    •  

    More information

  • NR pump series

    Circulation pumps with air cooled motors.

    • Max. power: 4 kW
    • Max. capacity: 110 m3/hr
    • Max. capacity: 1833 l/min
    • Max. capacity: 110000 l/hr
    • Max. discharge head: 13,6 m
    • Max. pressure: 1 bar
    •  

    More information

  • CLC pump series

    Stainless steel AISI 316 sanitary centrifugal pumps with closed impellers.

    • Max. power: 15 kW
    • Max. capacity: 110 m3/hr
    • Max. capacity: 1833 l/min
    • Max. capacity: 110000 l/hr
    • Max. discharge head: 68 m
    • Max. pressure: 7 bar
    •  

    More information

  • C MAG-PL pump series

    Magnet driven centrifugal pumps with a plastic lining.

    • Max. power: 18,5 kW
    • Max. capacity: 130 m3/hr
    • Max. capacity: 1500 l/min
    • Max. capacity: 90000 l/hr
    • Max. discharge head: 44 m
    • Max. pressure: 4 bar
    • Speed: 2900 rpm
    •  

    More information

  • 3M4 series and 3LM4 pump series

    Stainless steel AISI 304 and AISI close-coupled centrifugal pumps compliant with EN 733/DIN 24255.

    • Max. power: 7,5 kW
    • Max. capacity: 132 m3/hr
    • Max. capacity: 2200 l/min
    • Max. capacity: 132000 l/hr
    • Max. discharge head: 24,5 m
    • Max. pressure: 2 bar
    • Speed: 1450 rpm
    •  

    More information

  • 3P series and 3LP pump series

    Stainless steel AISI 304 and AISI 316 centrifugal pumps with bearing unit compliant with EN 733/DIN 24255.

    • Max. power: 22 kW
    • Max. capacity: 132 m3/hr
    • Max. capacity: 2200 l/min
    • Max. capacity: 132000 l/hr
    • Max. discharge head: 71 m
    • Max. pressure: 7 bar
    •  

    More information

  • CL pump series

    Stainless steel AISI 316 sanitary centrifugal pumps with open impellers.

    • Max. power: 15 kW
    • Max. capacity: 140 m3/hr
    • Max. capacity: 2333 l/min
    • Max. capacity: 140000 l/hr
    • Max. discharge head: 46 m
    • Max. pressure: 5 bar
    •  

    More information

  • CSM pump series

    Stainless steel AISI 316 multi-stage high pressure centrifugal pumps.

    • Max. power: 37 kW
    • Max. capacity: 140 m3/hr
    • Max. capacity: 2333 l/min
    • Max. capacity: 140000 l/hr
    • Max. discharge head: 155 m
    • Max. pressure: 16 bar
    • Speed: 2900 rpm
    •  

    More information

  • CR pump series with screw impeller

    Stainless steel AISI 316 sanitary centrifugal pumps with screw impellers.

    • Max. power: 22 kW
    • Max. capacity: 200 m3/hr
    • Max. capacity: 3333 l/min
    • Max. capacity: 200000 l/hr
    • Max. discharge head: 24 m
    • Max. pressure: 2 bar
    • Max. drainage: 63 mm
    •  

    More information

  • ECO BNM pomp series

    Normalized pumps with stub shaft to DIN 24255 / EN 733 1450/2900 rpm.

    • Max. capacity: 200 m3/hr
    • Max. capacity: 3333 l/min
    • Max. capacity: 200000 l/hr
    • Max. discharge head: 100 m
    • Max. pressure: 10 bar
    •  

    More information

  • ECO SNL pump series

    In-line centrifugal pumps with stub shaft.

    • Max. capacity: 200 m3/hr
    • Max. capacity: 3333 l/min
    • Max. capacity: 200000 l/hr
    • Max. discharge head: 100 m
    • Max. pressure: 10 bar
    •  

    More information

  • 3S series and 3LS pump series

    Stainless steel AISI 304 and AISI 316 centrifugal pumps compliant with EN 733/DIN 24255 with IEC motor.

    • Max. power: 55 kW
    • Max. capacity: 240 m3/hr
    • Max. capacity: 2200 l/min
    • Max. capacity: 132000 l/hr
    • Max. discharge head: 71 m
    • Max. pressure: 7 bar
    •  

    More information

  • 3M series and 3LM pump series

    Stainless steel AISI 304 and AISI close-coupled centrifugal pumps compliant with EN 733/DIN 24255.

    • Max. power: 55 kW
    • Max. capacity: 240 m3/hr
    • Max. capacity: 4000 l/min
    • Max. capacity: 240000 l/hr
    • Max. discharge head: 95 m
    • Max. pressure: 10 bar
    • Speed: 2900 rpm
    •  

    More information

  • HD pump series with closed impeller

    Stainless steel AISI 316 centrifugal pumps with closed impeller.

    • Max. power: 55 kW
    • Max. capacity: 250 m3/hr
    • Max. capacity: 4167 l/min
    • Max. capacity: 250000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    •  

    More information

  • HG pump series with open impeller

    Stainless steel AISI 316 centrifugal pumps with open impeller.

    • Max. power: 55 kW
    • Max. capacity: 250 m3/hr
    • Max. capacity: 4167 l/min
    • Max. capacity: 250000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    •  

    More information

  • NM / NMS pump series standard

    Standard pumps compliant with DIN 24255/EN 733 2900 rpm.

    • Max. power: 75 kW
    • Max. capacity: 300 m3/hr
    • Max. capacity: 5000 l/min
    • Max. capacity: 300000 l/hr
    • Max. discharge head: 95 m
    • Max. pressure: 10 bar
    • Speed: 2900 rpm
    •  

    More information

  • CS pump series

    Centrifugal pumps are used for pumping low-viscosity, neutral or corrosive fluids

    • Max. power: 37 kW
    • Max. capacity: 330 m3/hr
    • Max. capacity: 5500 l/min
    • Max. capacity: 330000 l/hr
    • Max. discharge head: 100 m
    • Max. pressure: 10 bar
    •  

    More information

  • CL SEAL-M ISO pump series

    Centrifugal pumps with plastic lining follow ISO 2858 -. ISO 5199 Mechanical seal chamber according to ISO 3069 / UNI EN 12756.

    • Max. capacity: 340 m3/hr
    • Max. capacity: 5667 l/min
    • Max. capacity: 340000 l/hr
    • Max. discharge head: 86 m
    • Max. pressure: 9 bar
    •  

    More information

  • RC pump series with recessed impeller

    Centrifugal pumps with recessed impeller.

    • Max. power: 55 kW
    • Max. capacity: 350 m3/hr
    • Max. capacity: 5833 l/min
    • Max. capacity: 350000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 115 mm
    •  

    More information

  • SKMV-H pump series

    High pressure vertical multi-stage centrifugal pumps with bearing unit in cast version.

    • Max. power: 75 kW
    • Max. capacity: 400 m3/hr
    • Max. capacity: 6667 l/min
    • Max. capacity: 400000 l/hr
    • Max. discharge head: 350 m
    • Max. pressure: 35 bar
    •  

    More information

  • SKM-E pump series

    Horizontal multistage centrifugal pumps with closed impellers.

    • Max. capacity: 400 m3/hr
    • Max. capacity: 6667 l/min
    • Max. capacity: 400000 l/hr
    • Max. discharge head: 390 m
    • Max. pressure: 39 bar
    •  

    More information

  • NM4 / NMS4 pump series

    Standard pumps compliant with DIN 24255/EN 733 1450 rpm.

    • Max. power: 75 kW
    • Max. capacity: 480 m3/hr
    • Max. capacity: 8000 l/min
    • Max. capacity: 480000 l/hr
    • Max. discharge head: 61,5 m
    • Max. pressure: 6 bar
    • Speed: 1450 rpm
    •  

    More information

  • BNM pump series

    Standard pumps with drive shaft compliant with DIN 24255/EN 733 1450/2900 rpm.

    • Max. power: 55 kW
    • Max. capacity: 500 m3/hr
    • Max. capacity: 8333 l/min
    • Max. capacity: 500000 l/hr
    • Max. discharge head: 95 m
    • Max. pressure: 10 bar
    •  

    More information

  • SNL pump series

    In line centrifugal pumps with drive shaft.

    • Max. power: 110 kW
    • Max. capacity: 500 m3/hr
    • Max. capacity: 8333 l/min
    • Max. capacity: 500000 l/hr
    • Max. discharge head: 95 m
    • Max. pressure: 10 bar
    •  

    More information

  • ECO SKY pump series

    Thermal oil pumps with bearing unit on base plate and B3 motor.

    • Max. capacity: 500 m3/hr
    • Max. capacity: 8333 l/min
    • Max. capacity: 500000 l/hr
    • Max. discharge head: 105 m
    • Max. pressure: 10 bar
    •  

    More information

  • CSK pump series

    Stainless steel AISI 316 sanitary centrifugal pumps with open impellers and bearing unit.

    • Max. power: 37 kW
    • Max. capacity: 560 m3/hr
    • Max. capacity: 9333 l/min
    • Max. capacity: 560000 l/hr
    • Max. discharge head: 100 m
    • Max. pressure: 10 bar
    •  

    More information