Centrifugal Pumps

The operating principal of the centrifugal pump is one of the most common principals and can be deployed in situation where thin liquids of up to a viscosity of approx. 150 mPa.s. have to be pumped.

There are many different types of impellers including: closed impellers, half open impellers, entirely open impellers, recessed impellers, peripheral impellers and side entry impellers. Each impeller type has its own specific characteristics.
 

A distinction is also made between standard-priming and self-priming centrifugal pumps. In both cases the impeller must always be below the water level, however, self-priming centrifugal pumps are better for air processing and are often constructed so that liquid remains in the pump house so the pumps can be stationed above the level of the liquid.
 

A critical point for centrifugal pumps is always their mechanical seal. These are made in various versions. For chemically aggressive liquids a magnet driven pump is often selected which are hermetically sealed from the atmospere.
 

  • EVMS pump series

    Vertical multi-stage centrifugal pumps with normalized motors.

    • Max. power: 18,5 kW
    • Max. capacity: 100 m3/hr
    • Max. capacity: 1666,67 l/min
    • Max. capacity: 100000 l/hr
    • Max. discharge head: 300 m
    • Max. pressure: 30 bar
    •  

    More information

  • RC pump series with recessed impeller

    Centrifugal pumps with recessed impeller.

    • Max. power: 55 kW
    • Max. capacity: 350 m3/hr
    • Max. capacity: 5833 l/min
    • Max. capacity: 350000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 115 mm
    •  

    More information

  • SCP pump series

    Chemical process pumps that comply with EN 22858 / ISO 2858.

    • Max. capacity: 600 m3/hr
    • Max. capacity: 10000 l/min
    • Max. capacity: 600000 l/hr
    • Max. discharge head: 170 m
    • Max. pressure: 17 bar
    •  

    More information

  • RB pump series with channel impeller

    Centrifugal pumps with channel impeller.

    • Max. power: 110 kW
    • Max. capacity: 1200 m3/hr
    • Max. capacity: 20000 l/min
    • Max. capacity: 1200000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 40 mm
    •  

    More information

  • S  pump series in uncoupled axle

    Self-priming waste water centrifugal pumps with bearing unit in uncoupled axle.

    • Max. power: 55 kW
    • Max. capacity: 1440 m3/hr
    • Max. capacity: 24000 l/min
    • Max. capacity: 1440000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 80 mm
    •  

    More information

  • S pump series Bi-Block

    Self-priming waste water centrifugal pumps with standard IEC electric motor.

    • Max. power: 55 kW
    • Max. capacity: 1440 m3/hr
    • Max. capacity: 24000 l/min
    • Max. capacity: 1440000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 80 mm
    •  

    More information

  • S pump series Monoblock

    Self-priming monoblock waste water centrifugal pumps.

    • Max. power: 55 kW
    • Max. capacity: 1440 m3/hr
    • Max. capacity: 24000 l/min
    • Max. capacity: 1440000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 80 mm
    •  

    More information

  • SCP-HT pump series

    Centrifugal pumps for hot water.

    • Max. capacity: 1700 m3/hr
    • Max. capacity: 28333 l/min
    • Max. capacity: 1700000 l/hr
    • Max. discharge head: 160 m
    • Max. pressure: 16 bar
    •  

    More information

  • Habermann NPW pump series

    Pumps specially for industrial sludge applications.

    • Max. capacity: 4600 m3/hr
    • Max. capacity: 76,666 l/min
    • Max. capacity: 4600 l/hr
    • Max. discharge head: 70 m
    • Max. pressure: 7 bar
    •  

    More information

  • Habermann HPK pump series

    The HPK series with internal lining are used for pumping abrasive / corrosive liquids.

    • Max. capacity: 4600 m3/hr
    • Max. capacity: 76667 l/min
    • Max. capacity: 4600 l/hr
    • Max. discharge head: 70 m
    • Max. pressure: 7 bar
    •  

    More information

  • Habermann NPK pump series

    The NPK series is used for pumping very abrasive liquids.

    • Max. capacity: 4600 m3/hr
    • Max. capacity: 76667 l/min
    • Max. capacity: 4600 l/hr
    • Max. discharge head: 95 m
    • Max. pressure: 9,5 bar
    • Max. drainage: 100 mm
    •  

    More information