Centrifugal Pumps

The operating principal of the centrifugal pump is one of the most common principals and can be deployed in situation where thin liquids of up to a viscosity of approx. 300 mPa.s. have to be pumped.

There are many different types of impellers including: closed impellers, half open impellers, entirely open impellers, recessed impellers, peripheral impellers and side entry impellers. Each impeller type has its own specific characteristics.
 

A distinction is also made between standard-priming and self-priming centrifugal pumps. In both cases the impeller must always be below the water level, however, self-priming centrifugal pumps are better for air processing and are often constructed so that liquid remains in the pump house so the pumps can be stationed above the level of the liquid.
 

A critical point for centrifugal pumps is always their mechanical seal. These are made in various versions. For chemically aggressive liquids a magnet driven pump is often selected which are hermetically sealed from the atmospere.
 

  • CM MAG-P pump series

    Magnetic drive synthetic centrifugal pumps.

    • Max. power: 4 kW
    • Max. capacity: 35 m3/hr
    • Max. capacity: 583 l/min
    • Max. capacity: 35000 l/hr
    • Max. discharge head: 24 m
    • Max. pressure: 2 bar
    •  

    More information

  • C MAG-PL pump series

    Magnet driven centrifugal pumps with a plastic lining.

    • Max. power: 18,5 kW
    • Max. capacity: 130 m3/hr
    • Max. capacity: 1500 l/min
    • Max. capacity: 90000 l/hr
    • Max. discharge head: 44 m
    • Max. pressure: 4 bar
    • Speed: 2900 rpm
    •  

    More information

  • CL MAG-M pump series

    Magnet driven centrifugal pumps with a plastic lining.

    • Max. power: 15 kW
    • Max. capacity: 90 m3/hr
    • Max. capacity: 1500 l/min
    • Max. capacity: 90000 l/hr
    • Max. discharge head: 63 m
    • Max. pressure: 6 bar
    • Speed: 2900 rpm
    •  

    More information

  • GV / GVF pump series

    Self-priming plastic magnetic drive centrifugal pumps.

    • Max. power: 3,7 kW
    • Max. capacity: 27 m3/hr
    • Max. capacity: 450 l/min
    • Max. capacity: 27000 l/hr
    • Max. discharge head: 26 m
    • Max. pressure: 3 bar
    •  

    More information

  • ARBO Sealpro pump series

    Horizontal plastic chemical centrifugal pumps with shaft seal.

    • Max. power: 5,5 kW
    • Max. capacity: 45 m3/hr
    • Max. capacity: 750 l/min
    • Max. capacity: 45000 l/hr
    • Max. discharge head: 37 m
    • Max. drainage: 2 mm
    •  

    More information

  • ARBO HD-KR / TK pump series

    Plastic chemical standard centrifugal pumps with shaft seal according to ISO 2858.

    • Max. power: 75 kW
    • Max. capacity: 750 m3/hr
    • Max. capacity: 12500 l/min
    • Max. capacity: 750000 l/hr
    • Max. discharge head: 90 m
    • Max. pressure: 9 bar
    • Max. drainage: 3 mm
    •  

    More information

  • CL SEAL-M ISO pump series

    Centrifugal pumps with plastic lining follow ISO 2858 -. ISO 5199 Mechanical seal chamber according to ISO 3069 / UNI EN 12756.

    • Max. power: 75 kW
    • Max. capacity: 340 m3/hr
    • Max. capacity: 5667 l/min
    • Max. capacity: 340000 l/hr
    • Max. discharge head: 86 m
    • Max. pressure: 9 bar
    •  

    More information

  • T MAG-P pump series

    Magnet-driven plastic centrifugal pumps with a peripheral impeller.

    • Max. power: 9,2 kW
    • Max. capacity: 13 m3/hr
    • Max. capacity: 217 l/min
    • Max. capacity: 13000 l/hr
    • Max. discharge head: 53 m
    • Max. pressure: 5 bar
    •  

    More information

  • T MAG-PM pump series

    Magnet-driven plastic centrifugal pumps with a peripheral fan.

    • Max. power: 5,5 kW
    • Max. capacity: 13 m3/hr
    • Max. capacity: 217 l/min
    • Max. capacity: 13000 l/hr
    • Max. discharge head: 53 m
    • Max. pressure: 5 bar
    • Speed: 2900 rpm
    •  

    More information