Centrifugal Pumps
The operating principal of the centrifugal pump is one of the most common principals and can be deployed in situation where thin liquids of up to a viscosity of approx. 300 mPa.s. have to be pumped.
There are many different types of impellers including: closed impellers, half open impellers, entirely open impellers, recessed impellers, peripheral impellers and side entry impellers. Each impeller type has its own specific characteristics.
A distinction is also made between standard-priming and self-priming centrifugal pumps. In both cases the impeller must always be below the water level, however, self-priming centrifugal pumps are better for air processing and are often constructed so that liquid remains in the pump house so the pumps can be stationed above the level of the liquid.
A critical point for centrifugal pumps is always their mechanical seal. These are made in various versions. For chemically aggressive liquids a magnet driven pump is often selected which are hermetically sealed from the atmospere.
Magnet driven centrifugal pumps with a plastic lining.
- Max. power: 15 kW
- Max. capacity: 90 m3/hr
- Max. capacity: 1500 l/min
- Max. capacity: 90000 l/hr
- Max. discharge head: 63 m
- Max. pressure: 6 bar
- Speed: 2900 rpm
Self-priming plastic magnetic drive centrifugal pumps.
- Max. power: 3,7 kW
- Max. capacity: 27 m3/hr
- Max. capacity: 450 l/min
- Max. capacity: 27000 l/hr
- Max. discharge head: 26 m
- Max. pressure: 3 bar
Horizontal plastic chemical centrifugal pumps with shaft seal.
- Max. power: 5,5 kW
- Max. capacity: 45 m3/hr
- Max. capacity: 750 l/min
- Max. capacity: 45000 l/hr
- Max. discharge head: 37 m
- Max. drainage: 2 mm
Plastic chemical standard centrifugal pumps with shaft seal according to ISO 2858.
- Max. power: 75 kW
- Max. capacity: 750 m3/hr
- Max. capacity: 12500 l/min
- Max. capacity: 750000 l/hr
- Max. discharge head: 90 m
- Max. pressure: 9 bar
- Max. drainage: 3 mm
Centrifugal pumps with plastic lining follow ISO 2858 -. ISO 5199 Mechanical seal chamber according to ISO 3069 / UNI EN 12756.
- Max. power: 75 kW
- Max. capacity: 340 m3/hr
- Max. capacity: 5667 l/min
- Max. capacity: 340000 l/hr
- Max. discharge head: 86 m
- Max. pressure: 9 bar
Magnet-driven plastic centrifugal pumps with a peripheral impeller.
- Max. power: 9,2 kW
- Max. capacity: 13 m3/hr
- Max. capacity: 217 l/min
- Max. capacity: 13000 l/hr
- Max. discharge head: 53 m
- Max. pressure: 5 bar
Magnet-driven plastic centrifugal pumps with a peripheral fan.
- Max. power: 5,5 kW
- Max. capacity: 13 m3/hr
- Max. capacity: 217 l/min
- Max. capacity: 13000 l/hr
- Max. discharge head: 53 m
- Max. pressure: 5 bar
- Speed: 2900 rpm
Magnet-driven, metal centrifugal pumps with a peripheral impeller.
- Max. power: 30 kW
- Max. capacity: 12 m3/hr
- Max. capacity: 200 l/min
- Max. capacity: 12000 l/hr
- Max. discharge head: 164 m
- Max. pressure: 16 bar
- Speed: 2900 rpm
Magnetic drive metal centrifugal pumps with peripheral impeller.
- Max. power: 75 kW
- Max. capacity: 25 m3/hr
- Max. capacity: 417 l/min
- Max. capacity: 25000 l/hr
- Max. discharge head: 310 m
- Max. pressure: 31 bar
Chemical process pumps that comply with EN 22858 / ISO 2858.
- Max. power: 500 kW
- Max. capacity: 1800 m3/hr
- Max. capacity: 10000 l/min
- Max. capacity: 600000 l/hr
- Max. discharge head: 170 m
- Max. pressure: 17 bar
Magnetic drive metal centrifugal pumps compliant with ISO 2858/DIN 24256.
- Max. power: 1000 kW
- Max. capacity: 900 m3/hr
- Max. capacity: 15000 l/min
- Max. capacity: 900000 l/hr
- Max. discharge head: 150 m
- Max. pressure: 15 bar
Magnetic drive metal centrifugal pumps compliant with API 685.
- Max. power: 320 kW
- Max. capacity: 1000 m3/hr
- Max. capacity: 16667 l/min
- Max. capacity: 1000000 l/hr
- Max. discharge head: 220 m
- Max. pressure: 22 bar
The HPK series with internal lining are used for pumping abrasive / corrosive liquids.
- Max. capacity: 4600 m3/hr
- Max. capacity: 76667 l/min
- Max. capacity: 4600 l/hr
- Max. discharge head: 70 m
- Max. pressure: 7 bar
The NPK series is used for pumping very abrasive liquids.
- Max. capacity: 4600 m3/hr
- Max. capacity: 76667 l/min
- Max. capacity: 4600 l/hr
- Max. discharge head: 95 m
- Max. pressure: 9,5 bar
- Max. drainage: 100 mm
Pumps specially for industrial sludge applications.
- Max. capacity: 4600 m3/hr
- Max. capacity: 76,666 l/min
- Max. capacity: 4600 l/hr
- Max. discharge head: 70 m
- Max. pressure: 7 bar
Thermal oil pumps with bearing unit on base plate and B3 motor.
- Max. power: 110 kW
- Max. capacity: 500 m3/hr
- Max. capacity: 8333 l/min
- Max. capacity: 500000 l/hr
- Max. discharge head: 105 m
- Max. pressure: 10 bar
Stainless steel AISI 316 Peripheral impeller pump.
- Max. power: 4 kW
- Max. capacity: 6 m3/hr
- Max. capacity: 100 l/min
- Max. capacity: 6000 l/hr
- Max. discharge head: 77 m
- Speed: 2900 rpm
Stainless steel AISI 316 multi-stage high pressure centrifugal pumps.
- Max. power: 25 kW
- Max. capacity: 100 m3/hr
- Max. capacity: 1667 l/min
- Max. capacity: 100000 l/hr
- Max. discharge head: 80 m
- Max. pressure: 8 bar
- Speed: 2900 rpm
Stainless steel hygienic centrifugalpumps with open impeller
- Max. capacity: 75 m3/hr
- Max. capacity: 1250 l/min
- Max. capacity: 75000 l/hr
- Max. discharge head: 60 m
- Max. pressure: 6 bar
Stainless steel AISI 316 selfpriming centrifugalpumps with open impeller.
- Max. capacity: 60 m3/hr
- Max. capacity: 1000 l/min
- Max. capacity: 60000 l/hr
- Max. discharge head: 70 m
- Max. pressure: 7 bar
Stainless steel AISI 316 sanitary centrifugal pumps with closed impellers.
- Max. power: 15 kW
- Max. capacity: 90 m3/hr
- Max. capacity: 1500 l/min
- Max. capacity: 90000 l/hr
- Max. discharge head: 50 m
- Max. pressure: 5 bar
Centrifugal pumps are used for pumping low-viscosity, neutral or corrosive fluids
- Max. power: 37 kW
- Max. capacity: 330 m3/hr
- Max. capacity: 5500 l/min
- Max. capacity: 330000 l/hr
- Max. discharge head: 100 m
- Max. pressure: 10 bar
Stainless steel AISI 316 sanitary centrifugal pumps with open impellers and bearing unit.
- Max. power: 37 kW
- Max. capacity: 560 m3/hr
- Max. capacity: 9333 l/min
- Max. capacity: 560000 l/hr
- Max. discharge head: 100 m
- Max. pressure: 10 bar
Stainless steel AISI 316 sanitary centrifugal pumps with screw impellers.
- Max. power: 22 kW
- Max. capacity: 200 m3/hr
- Max. capacity: 3333 l/min
- Max. capacity: 200000 l/hr
- Max. discharge head: 24 m
- Max. pressure: 2 bar
- Max. drainage: 63 mm
Stainless steel AISI 316 multi-stage high pressure centrifugal pumps.
- Max. power: 37 kW
- Max. capacity: 140 m3/hr
- Max. capacity: 2333 l/min
- Max. capacity: 140000 l/hr
- Max. discharge head: 155 m
- Max. pressure: 16 bar
- Speed: 2900 rpm
Stainless steel AISI 304 centrifugal pumps.
- Max. power: 1,8 kW
- Max. capacity: 15 m3/hr
- Max. capacity: 250 l/min
- Max. capacity: 15000 l/hr
- Max. discharge head: 38 m
- Max. pressure: 4 bar
- Speed: 2900 rpm
Horizontal centrifugal pumps in stainless steel AISI 304 with 2 impellers.
- Max. power: 4 kW
- Max. capacity: 12 m3/hr
- Max. capacity: 200 l/min
- Max. capacity: 12000 l/hr
- Max. discharge head: 73 m
- Max. pressure: 7 bar
- Speed: 2900 rpm
Stainless steel AISI 304 multi-stage centrifugal pumps.
- Max. power: 0,75 kW
- Max. capacity: 7,2 m3/hr
- Max. capacity: 120 l/min
- Max. capacity: 7200 l/hr
- Max. discharge head: 46 m
- Max. pressure: 5 bar
- Speed: 2900 rpm
Self-priming multi-stage centrifugal pumps
- Max. power: 1,1 kW
- Max. capacity: 8 m3/hr
- Max. capacity: 133 l/min
- Max. capacity: 8000 l/hr
- Max. discharge head: 56 m
- Max. pressure: 6 bar
- Speed: 2900 rpm
Self-priming jet pumps in stainless steel AISI 304.
- Max. power: 1,5 kW
- Max. capacity: 8,4 m3/hr
- Max. capacity: 140 l/min
- Max. capacity: 8400 l/hr
- Max. discharge head: 61 m
- Max. pressure: 6 bar
- Speed: 2900 rpm
Stainless steel AISI 304 multi-stage centrifugal pumps.
- Max. power: 4 kW
- Max. capacity: 27 m3/hr
- Max. capacity: 450 l/min
- Max. capacity: 27000 l/hr
- Max. discharge head: 97 m
- Max. pressure: 10 bar
Stainless steel AISI 304 multi-stage centrifugal pumps.
- Max. power: 4 kW
- Max. capacity: 25 m3/hr
- Max. capacity: 417 l/min
- Max. capacity: 25000 l/hr
- Max. discharge head: 68,5 m
- Max. pressure: 7 bar
- Speed: 2900 rpm
Stainless steel AISI 304 multi-stage centrifugal pumps.
- Max. power: 7,5 kW
- Max. capacity: 66 m3/hr
- Max. capacity: 1100 l/min
- Max. capacity: 66000 l/hr
- Max. discharge head: 74 m
- Max. pressure: 7 bar
- Speed: 2900 rpm
Vind de juiste pomp met onze pompselector
Op zoek naar de juiste capaciteit of maximale temperatuur, op basis materiaal of van een bepaald medium? Door het invullen van de pompselector, kunt u de juiste pompen voor uw toepassing vinden.
Naar pompselectieRefine by type
Refine by material
Refine by application
- Tankcleaning
- Animal feed
- Biogas plants
- Boiler feed and condensate
- Chemicals
- Cocoa mass and cocoa butter
- Food industry
- Gas and air scrubbers
- Industrial wastewater and wastewater treatment
- Loading and unloading trucks
- Machine and equipment construction (OEM)
- Meat processing industry
- Paper and cardboard industry
- Petrochemistry
- Pharmaceuticals
- Potato processing industry
- Process and cooling water
- Reversed Osmosis (RO)
- Shipping and dredging industry
- Slaughterhouses
- Surface treatment
- Thermal oil