Centrifugal Pumps

The operating principal of the centrifugal pump is one of the most common principals and can be deployed in situation where thin liquids of up to a viscosity of approx. 150 mPa.s. have to be pumped.

There are many different types of impellers including: closed impellers, half open impellers, entirely open impellers, recessed impellers, peripheral impellers and side entry impellers. Each impeller type has its own specific characteristics.
 

A distinction is also made between standard-priming and self-priming centrifugal pumps. In both cases the impeller must always be below the water level, however, self-priming centrifugal pumps are better for air processing and are often constructed so that liquid remains in the pump house so the pumps can be stationed above the level of the liquid.
 

A critical point for centrifugal pumps is always their mechanical seal. These are made in various versions. For chemically aggressive liquids a magnet driven pump is often selected which are hermetically sealed from the atmospere.
 

  • CT 61 series

    Close-coupled centrifugal pumps with peripheral impeller.

    • Max. power: 0,33 kW
    • Max. capacity: 2,3 m3/hr
    • Max. capacity: 38 l/min
    • Max. capacity: 2300 l/hr
    • Max. discharge head: 41 m
    • Max. pressure: 4 bar
    •  

    More information

  • CA pump series

    Self-priming water ring pumps

    • Max. power: 0,75 kW
    • Max. capacity: 2,4 m3/hr
    • Max. capacity: 40 l/min
    • Max. capacity: 2400 l/hr
    • Max. discharge head: 53 m
    • Max. pressure: 5 bar
    • Speed: 2900 rpm
    •  

    More information

  • T en TP pump series

    Close-coupled centrifugal pumps with peripheral impeller.

    • Max. power: 7,5 kW
    • Max. capacity: 6 m3/hr
    • Max. capacity: 100 l/min
    • Max. capacity: 6000 l/hr
    • Max. discharge head: 165 m
    • Max. pressure: 17 bar
    • Speed: 2900 rpm
    •  

    More information

  • MGP pump series

    Cast-iron horizontal multi-stage centrifugal pumps.

    • Max. power: 0,55 kW
    • Max. capacity: 7,2 m3/hr
    • Max. capacity: 120 l/min
    • Max. capacity: 7200 l/hr
    • Max. discharge head: 38 m
    • Max. pressure: 4 bar
    •  

    More information

  • NG pump series

    Self-priming jet pumps in cast iron

    • Max. power: 2,2 kW
    • Max. capacity: 9,5 m3/hr
    • Max. capacity: 158 l/min
    • Max. capacity: 9500 l/hr
    • Max. discharge head: 89 m
    • Max. pressure: 9 bar
    • Speed: 2900 rpm
    •  

    More information

  • NMD pump series

    Close-coupled centrifugal pumps with 2 impellers.

    • Max. power: 9,2 kW
    • Max. capacity: 24 m3/hr
    • Max. capacity: 400 l/min
    • Max. capacity: 24000 l/hr
    • Max. discharge head: 114 m
    • Max. pressure: 11 bar
    • Speed: 2900 rpm
    •  

    More information

  • NM pump series

    Close-coupled centrifugal pumps.

    • Max. power: 4 kW
    • Max. capacity: 66 m3/hr
    • Max. capacity: 1100 l/min
    • Max. capacity: 66000 l/hr
    • Max. discharge head: 59 m
    • Max. pressure: 6 bar
    •  

    More information

  • Circulators

    Circulators for heating and conditioning.

    • Max. capacity: 78 m3/hr
    • Max. capacity: 1300 l/min
    • Max. capacity: 78000 l/hr
    • Max. discharge head: 13 m
    • Max. pressure: 1 bar
    •  

    More information

  • EVMS pump series

    Vertical multi-stage centrifugal pumps with normalized motors.

    • Max. power: 18,5 kW
    • Max. capacity: 100 m3/hr
    • Max. capacity: 1666,67 l/min
    • Max. capacity: 100000 l/hr
    • Max. discharge head: 300 m
    • Max. pressure: 30 bar
    •  

    More information

  • NR pump series

    Circulation pumps with air cooled motors.

    • Max. power: 4 kW
    • Max. capacity: 110 m3/hr
    • Max. capacity: 1833 l/min
    • Max. capacity: 110000 l/hr
    • Max. discharge head: 13,6 m
    • Max. pressure: 1 bar
    •  

    More information

  • ECO BNM pomp series

    Normalized pumps with stub shaft to DIN 24255 / EN 733 1450/2900 rpm.

    • Max. capacity: 200 m3/hr
    • Max. capacity: 3333 l/min
    • Max. capacity: 200000 l/hr
    • Max. discharge head: 100 m
    • Max. pressure: 10 bar
    •  

    More information

  • ECO SNL pump series

    In-line centrifugal pumps with stub shaft.

    • Max. capacity: 200 m3/hr
    • Max. capacity: 3333 l/min
    • Max. capacity: 200000 l/hr
    • Max. discharge head: 100 m
    • Max. pressure: 10 bar
    •  

    More information

  • NM / NMS pump series standard

    Standard pumps compliant with DIN 24255/EN 733 2900 rpm.

    • Max. power: 75 kW
    • Max. capacity: 300 m3/hr
    • Max. capacity: 5000 l/min
    • Max. capacity: 300000 l/hr
    • Max. discharge head: 95 m
    • Max. pressure: 10 bar
    • Speed: 2900 rpm
    •  

    More information

  • SKMV-H pump series

    High pressure vertical multi-stage centrifugal pumps with bearing unit in cast version.

    • Max. power: 75 kW
    • Max. capacity: 400 m3/hr
    • Max. capacity: 6667 l/min
    • Max. capacity: 400000 l/hr
    • Max. discharge head: 350 m
    • Max. pressure: 35 bar
    •  

    More information

  • SKM-E pump series

    Horizontal multistage centrifugal pumps with closed impellers.

    • Max. capacity: 400 m3/hr
    • Max. capacity: 6667 l/min
    • Max. capacity: 400000 l/hr
    • Max. discharge head: 390 m
    • Max. pressure: 39 bar
    •  

    More information

  • NM4 / NMS4 pump series

    Standard pumps compliant with DIN 24255/EN 733 1450 rpm.

    • Max. power: 75 kW
    • Max. capacity: 480 m3/hr
    • Max. capacity: 8000 l/min
    • Max. capacity: 480000 l/hr
    • Max. discharge head: 61,5 m
    • Max. pressure: 6 bar
    • Speed: 1450 rpm
    •  

    More information

  • BNM pump series

    Standard pumps with drive shaft compliant with DIN 24255/EN 733 1450/2900 rpm.

    • Max. power: 55 kW
    • Max. capacity: 500 m3/hr
    • Max. capacity: 8333 l/min
    • Max. capacity: 500000 l/hr
    • Max. discharge head: 95 m
    • Max. pressure: 10 bar
    •  

    More information

  • SNL pump series

    In line centrifugal pumps with drive shaft.

    • Max. power: 110 kW
    • Max. capacity: 500 m3/hr
    • Max. capacity: 8333 l/min
    • Max. capacity: 500000 l/hr
    • Max. discharge head: 95 m
    • Max. pressure: 10 bar
    •  

    More information

  • ECO SNT pump series

    Normalized pumps according to DIN 24255 / EN 733 with bearing block on base and B3 motor.

    • Max. capacity: 600 m3/hr
    • Max. capacity: 10000 l/min
    • Max. capacity: 600000 l/hr
    • Max. discharge head: 100 m
    • Max. pressure: 10 bar
    •  

    More information

  • SKM-K pump series

    Horizontal multistage centrifugal pumps with closed impellers.

    • Max. capacity: 700 m3/hr
    • Max. capacity: 11667 l/min
    • Max. capacity: 700000 l/hr
    • Max. discharge head: 560 m
    • Max. pressure: 56 bar
    •  

    More information

  • SNLV-H pump serie

    In-line centrifugaalpumps with integrated bearing block.

    • Max. power: 75 kW
    • Max. capacity: 800 m3/hr
    • Max. capacity: 13333 l/min
    • Max. capacity: 800000 l/hr
    • Max. discharge head: 95 m
    • Max. pressure: 10 bar
    •  

    More information

  • SKM pump series

    Horizontal multistage centrifugal pumps with closed impellers.

    • Max. capacity: 1000 m3/hr
    • Max. capacity: 16667 l/min
    • Max. capacity: 1000000 l/hr
    • Max. discharge head: 400 m
    • Max. pressure: 40 bar
    •  

    More information

  • SNMV-H pump serie

    Vertical centrifugal pumps.

    • Max. capacity: 1400 m3/hr
    • Max. capacity: 28333 l/min
    • Max. capacity: 1700000 l/hr
    • Max. discharge head: 100 m
    • Max. pressure: 10 bar
    •  

    More information

  • S  pump series in uncoupled axle

    Self-priming waste water centrifugal pumps with bearing unit in uncoupled axle.

    • Max. power: 55 kW
    • Max. capacity: 1440 m3/hr
    • Max. capacity: 24000 l/min
    • Max. capacity: 1440000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 80 mm
    •  

    More information

  • S pump series Bi-Block

    Self-priming waste water centrifugal pumps with standard IEC electric motor.

    • Max. power: 55 kW
    • Max. capacity: 1440 m3/hr
    • Max. capacity: 24000 l/min
    • Max. capacity: 1440000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 80 mm
    •  

    More information

  • S pump series Monoblock

    Self-priming monoblock waste water centrifugal pumps.

    • Max. power: 55 kW
    • Max. capacity: 1440 m3/hr
    • Max. capacity: 24000 l/min
    • Max. capacity: 1440000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 80 mm
    •  

    More information

  • SNT pump series

    Standard pumps compliant with DIN 24255/EN 733 with bearing unit on base plate and B3 motor.

    • Max. power: 400 kW
    • Max. capacity: 1700 m3/hr
    • Max. capacity: 28333 l/min
    • Max. capacity: 1700000 l/hr
    • Max. discharge head: 100 m
    • Max. pressure: 10 bar
    •  

    More information

  • SCP-HT pump series

    Centrifugal pumps for hot water.

    • Max. capacity: 1700 m3/hr
    • Max. capacity: 28333 l/min
    • Max. capacity: 1700000 l/hr
    • Max. discharge head: 160 m
    • Max. pressure: 16 bar
    •  

    More information

  • SDS pump series

    Horizontal split case pump.

    • Max. capacity: 3500 m3/hr
    • Max. capacity: 58333 l/min
    • Max. capacity: 3500000 l/hr
    • Max. discharge head: 240 m
    • Max. pressure: 24 bar
    •  

    More information

  • Habermann NPW pump series

    Pumps specially for industrial sludge applications.

    • Max. capacity: 4600 m3/hr
    • Max. capacity: 76,666 l/min
    • Max. capacity: 4600 l/hr
    • Max. discharge head: 70 m
    • Max. pressure: 7 bar
    •  

    More information

  • Habermann HPK pump series

    The HPK series with internal lining are used for pumping abrasive / corrosive liquids.

    • Max. capacity: 4600 m3/hr
    • Max. capacity: 76667 l/min
    • Max. capacity: 4600 l/hr
    • Max. discharge head: 70 m
    • Max. pressure: 7 bar
    •  

    More information

  • Habermann NPK pump series

    The NPK series is used for pumping very abrasive liquids.

    • Max. capacity: 4600 m3/hr
    • Max. capacity: 76667 l/min
    • Max. capacity: 4600 l/hr
    • Max. discharge head: 95 m
    • Max. pressure: 9,5 bar
    • Max. drainage: 100 mm
    •  

    More information