Submersible pump

Submersible pumps are used mainly for pumping waste water in sumps, water purification installations and cellars.

Submersible pumps are equipped with an integrated electric motor that is cooled by the liquid the pump is standing in. This means that the temperature of the liquid must usually not be higher than 40°C. For liquids with higher temperatures, one of our cantilever pumps would be a better choice, as these use air cooled electric motors that are fixed above the liquid level, or an entirely dry stationed pump.


Bedu Pumps offers you a very wide and diverse range of submersible pumps, for both clean and (heavily) polluted waste water. You can make your selection from various impeller types including a half open impeller, a recessed impeller, a closed 1 or 2 channel impeller, a half open channel impeller, a screw channel impeller or a cutting pump. You can also choose the type of material the pump is made of - from synthetics, cast iron, bronze, stainless steel AISI 304, stainless steel AISI 316 or even special alloys.


Besides the pump we can supply all the accessories you need to assemble the pump in a professional way. This might include a foot clutch, guidance system, hauling chains, non-return valves and a control panel with various types of level controls. Of course, we also deliver complete sumps in concrete or PE which we can install at your location and get working for you. For more information please look at the product category: Waste water installations.
 

  • Zenit GREY - DRG pump series

    Cast-iron submersible pumps for drainage and waste water.

    • Max. power: 18,5 kW
    • Max. capacity: 738 m3/hr
    • Max. capacity: 12300 l/min
    • Max. capacity: 738000 l/hr
    • Max. discharge head: 50 m
    • Max. drainage: 110 mm
    •  

    More information

  • Zenit GREY - APG pump series

    Cast iron high pressure submersible pumps.

    • Max. power: 9 kW
    • Max. capacity: 38 m3/hr
    • Max. capacity: 633 l/min
    • Max. capacity: 38000 l/hr
    • Max. discharge head: 52 m
    • Max. drainage: 10 mm
    •  

    More information

  • Zenit DR BluePro pump serie

    Cast iron submersible pumps for drainage water.

    • Max. power: 1,5 kW
    • Max. capacity: 41,4 m3/hr
    • Max. capacity: 690 l/min
    • Max. capacity: 41400 l/hr
    • Max. discharge head: 17 m
    • Max. pressure: 2 bar
    • Max. drainage: 15 mm
    • Speed: 2900 rpm
    •  

    More information

  • Zenit AP BluePro (HP) pump serie

    Cast iron submersible pumps for drainage / clean water.

    • Max. power: 1,5 kW
    • Max. capacity: 25,5 m3/hr
    • Max. capacity: 425 l/min
    • Max. capacity: 25500 l/hr
    • Max. discharge head: 26,6 m
    • Max. pressure: 3 bar
    • Speed: 2900 rpm
    •  

    More information

  • Zenit DRO pump series

    Cast-iron submersible pumps for drainage water.

    • Max. power: 1,5 kW
    • Max. capacity: 46 m3/hr
    • Max. capacity: 767 l/min
    • Max. capacity: 46000 l/hr
    • Max. discharge head: 18 m
    • Max. pressure: 2 bar
    •  

    More information

  • Zenit DRX pump series

    Stainless steel AISI 316 submersible pumps for drainage water..

    • Max. power: 1,5 kW
    • Max. capacity: 43 m3/hr
    • Max. capacity: 717 l/min
    • Max. capacity: 43000 l/hr
    • Max. discharge head: 18 m
    • Max. pressure: 2 bar
    •  

    More information

  • Zenit DRY pump series

    Stainless steel AISI 316 submersible pumps for drainage water.

    • Max. power: 8,9 kW
    • Max. capacity: 259 m3/hr
    • Max. capacity: 4317 l/min
    • Max. capacity: 259000 l/hr
    • Max. discharge head: 40 m
    • Max. pressure: 4 bar
    •  

    More information

  • Zenit DRB pump series

    Bronze submersible pumps for drainage water.

    • Max. power: 1,5 kW
    • Max. capacity: 43 m3/hr
    • Max. capacity: 717 l/min
    • Max. capacity: 43000 l/hr
    • Max. discharge head: 18 m
    • Max. pressure: 2 bar
    •  

    More information

  • GWN pump series

    Special magnetic drive pumps for corrosive liquids.

    • Max. power: 1,1 kW
    • Max. capacity: 19 m3/hr
    • Max. capacity: 317 l/min
    • Max. capacity: 19000 l/hr
    • Max. discharge head: 12 m
    • Max. pressure: 1 bar
    •  

    More information

  • Zenit DR Steel pump serie

    Stainless steel AISI 304 submersible pumps for drainage water.

    • Max. power: 0,75 kW
    • Max. capacity: 20 m3/hr
    • Max. capacity: 333 l/min
    • Max. capacity: 20000 l/hr
    • Max. discharge head: 16 m
    • Max. pressure: 2 bar
    • Max. drainage: 12 mm
    • Speed: 2900 rpm
    •  

    More information

  • Jung U3K pump series

    Plastic submersible pump for drainage water.

    • Max. power: 0,2 kW
    • Max. capacity: 6,3 m3/hr
    • Max. capacity: 105 l/min
    • Max. capacity: 6300 l/hr
    • Max. discharge head: 7 m
    • Max. pressure: 1 bar
    • Max. drainage: 10 mm
    • Speed: 2900 rpm
    •  

    More information

  • Jung U3K pump Spezial

    The U3K Spezial submersible pumps are ideal for pumping aggressive liquids.

    • Max. power: 0,2 kW
    • Max. capacity: 6,5 m3/hr
    • Max. capacity: 108 l/min
    • Max. capacity: 6500 l/hr
    • Max. discharge head: 7 m
    • Max. pressure: 1 bar
    •  

    More information

  • Jung U5K pump series

    Plastic submersible pump for drainage water.

    • Max. power: 0,38 kW
    • Max. capacity: 11,5 m3/hr
    • Max. capacity: 192 l/min
    • Max. capacity: 11500 l/hr
    • Max. discharge head: 8 m
    • Max. pressure: 1 bar
    • Max. drainage: 10 mm
    • Speed: 2900 rpm
    •  

    More information

  • Jung U6K pump series

    Plastic submersible pump for drainage water.

    • Max. power: 0,6 kW
    • Max. capacity: 17 m3/hr
    • Max. capacity: 283 l/min
    • Max. capacity: 17000 l/hr
    • Max. discharge head: 9 m
    • Max. pressure: 1 bar
    • Max. drainage: 10 mm
    • Speed: 2900 rpm
    •  

    More information

  • Jung Multidrain UV 600 pump

    Drainage submersible pumps for high pressure.

    • Max. power: 3,05 kW
    • Max. capacity: 38 m3/hr
    • Max. capacity: 633 l/min
    • Max. capacity: 38000 l/hr
    • Max. discharge head: 25 m
    • Max. drainage: 10 mm
    • Speed: 2900 rpm
    •  

    More information

  • DPC pump series

    Synthetic submersible pumps that can drain to a water level of up to 3 mm.

    • Max. power: 0,65 kW
    • Max. capacity: 9 m3/hr
    • Max. capacity: 150 l/min
    • Max. capacity: 9000 l/hr
    • Max. discharge head: 9,5 m
    • Max. pressure: 1 bar
    • Speed: 2900 rpm
    •  

    More information