Submersible pump

Submersible pumps are used mainly for pumping waste water in sumps, water purification installations and cellars.

Submersible pumps are equipped with an integrated electric motor that is cooled by the liquid the pump is standing in. This means that the temperature of the liquid must usually not be higher than 40°C. For liquids with higher temperatures, one of our cantilever pumps would be a better choice, as these use air cooled electric motors that are fixed above the liquid level, or an entirely dry stationed pump.


Bedu Pumps offers you a very wide and diverse range of submersible pumps, for both clean and (heavily) polluted waste water. You can make your selection from various impeller types including a half open impeller, a recessed impeller, a closed 1 or 2 channel impeller, a half open channel impeller, a screw channel impeller or a cutting pump. You can also choose the type of material the pump is made of - from synthetics, cast iron, bronze, stainless steel AISI 304, stainless steel AISI 316 or even special alloys.


Besides the pump we can supply all the accessories you need to assemble the pump in a professional way. This might include a foot clutch, guidance system, hauling chains, non-return valves and a control panel with various types of level controls. Of course, we also deliver complete sumps in concrete or PE which we can install at your location and get working for you. For more information please look at the product category: Waste water installations.
 

  • Zenit GRF series

    Cast-iron explosion-proof submersible pumps with external maceration.

    • Max. power: 1,5 kW
    • Max. capacity: 22 m3/hr
    • Max. capacity: 367 l/min
    • Max. capacity: 22000 l/hr
    • Max. discharge head: 23 m
    • Max. pressure: 2 bar
    •  

    More information

  • Zenit APF series

    Cast-iron explosion-proof hgh pressure submersible pumps.

    • Max. power: 1,5 kW
    • Max. capacity: 27,5 m3/hr
    • Max. capacity: 458 l/min
    • Max. capacity: 27500 l/hr
    • Max. discharge head: 22,5 m
    • Max. pressure: 2 bar
    • Speed: 2900 rpm
    •  

    More information

  • Zenit APN series

    Cast-iron high pressure submersible pumps.

    • Max. power: 4,1 kW
    • Max. capacity: 36 m3/hr
    • Max. capacity: 600 l/min
    • Max. capacity: 36000 l/hr
    • Max. discharge head: 38 m
    • Max. pressure: 4 bar
    • Speed: 2900 rpm
    •  

    More information

  • Zenit DR BluePro serie

    Cast iron submersible pumps for drainage water.

    • Max. power: 1,5 kW
    • Max. capacity: 41,4 m3/hr
    • Max. capacity: 690 l/min
    • Max. capacity: 41400 l/hr
    • Max. discharge head: 17 m
    • Max. pressure: 2 bar
    • Max. drainage: 15 mm
    • Speed: 2900 rpm
    •  

    More information

  • Zenit SMF series

    Cast-iron explosion-proof submersible pumps with closed channel impeller.

    • Max. power: 1,5 kW
    • Max. capacity: 47 m3/hr
    • Max. capacity: 783 l/min
    • Max. capacity: 47000 l/hr
    • Max. discharge head: 16 m
    • Max. pressure: 2 bar
    • Max. drainage: 48 mm
    •  

    More information

  • Zenit APP series

    Cast-iron high pressure submersible pumps.

    • Max. power: 10 kW
    • Max. capacity: 48 m3/hr
    • Max. capacity: 800 l/min
    • Max. capacity: 48000 l/hr
    • Max. discharge head: 58 m
    • Max. pressure: 6 bar
    • Speed: 2900 rpm
    •  

    More information

  • Zenit DGF series

    Cast-iron explosion-proof submersible pumps with recessed impeller.

    • Max. power: 1,5 kW
    • Max. capacity: 57 m3/hr
    • Max. capacity: 950 l/min
    • Max. capacity: 57000 l/hr
    • Max. discharge head: 17 m
    • Max. pressure: 2 bar
    • Max. drainage: 80 mm
    •  

    More information

  • Zenit MAF series

    Cast-iron explosion-proof submersible pumps with half-open channel impeller.

    • Max. power: 0,74 kW
    • Max. capacity: 65 m3/hr
    • Max. capacity: 1083 l/min
    • Max. capacity: 65000 l/hr
    • Max. discharge head: 6,5 m
    • Max. pressure: 1 bar
    • Max. drainage: 55 mm
    •  

    More information

  • Zenit DRF series

    Cast-iron explosion-proof submersible pumps.

    • Max. power: 1,5 kW
    • Max. capacity: 65 m3/hr
    • Max. capacity: 1083 l/min
    • Max. capacity: 65000 l/hr
    • Max. discharge head: 16 m
    • Max. pressure: 2 bar
    •  

    More information

  • Zenit Uniqa serie

    Cast-iron submersible pumps with recessed or more channel impeller for dirty water.

    • Max. power: 350 kW
    • Max. capacity: 2000 m3/hr
    • Max. capacity: 33333 l/min
    • Max. capacity: 2000000 l/hr
    • Max. discharge head: 62 m
    • Max. pressure: 6 bar
    • Max. drainage: 150 mm
    •  

    More information