MS2 pump series

MS2 pump series

Characteristics

High pressure pumps with fixed or variable capacity. Also available in ATEX versions and special CIP versions with retractable reels. All provided with leak detection.

  • Max. power: 7,5 kW
  • Max. capacity: 17 m3/hr
  • Max. capacity: 291 l/min
  • Max. capacity: 17443 l/hr
  • Max. discharge head: 150 m
  • Max. pressure: 15 bar
  • Max. drainage: 55 mm
  •  

Downloads

Brochure:
Handleiding:
Onderdelentekening:

The MS2 hose positive displacement pumps mainly used in applications in which a high pressure is required in combination with a fixed or variable capacity.

The pumps are available with hoses in various materials including natural rubber, foodgrade, nitrile, hypalon, silicone or EPDM, depending on the liquid to be pumped. The connections are also available in various materials, including stainless steel AISI 316, PVC, polypropylene, PVDF or Titanium.

The pumps can be supplied with various connections including hose connections, BSP thread connections, DIN flange connections, thread connections compliant with DIN 11851, clamp connections etc.

The speed that must be specified for the pumps is completely dependant upon the capacity you require, the temperature of the liquid, the desired pressure, the vacuum and the number of running hours.

The pumps are supplied with a fixed capacity that is based on a gear box with various transfer ratios, or in variable capacity which is obtained by a mechanical variable speed or a frequency control.

The pumps are equipped with roller bearing pressure and a dry pump housing which requires the hose to be periodically lubricated. The pumps have a leak detection system which signals when a hose is ruptured. This enables you to stop the pump immediately or make an alarm go off.

These pumps are also available in ATEX versions and special CIP versions with retractable reels. The CIP versions have the extra advantage that the hose is not under tension when the pump is not being used which extends its lifetime. This CIP version is available for pumps with a max. pressure up to  4 bar.

Material

  •  

Go back