Centrifugal Pumps

The operating principal of the centrifugal pump is one of the most common principals and can be deployed in situation where thin liquids of up to a viscosity of approx. 300 mPa.s. have to be pumped.

There are many different types of impellers including: closed impellers, half open impellers, entirely open impellers, recessed impellers, peripheral impellers and side entry impellers. Each impeller type has its own specific characteristics.
 

A distinction is also made between standard-priming and self-priming centrifugal pumps. In both cases the impeller must always be below the water level, however, self-priming centrifugal pumps are better for air processing and are often constructed so that liquid remains in the pump house so the pumps can be stationed above the level of the liquid.
 

A critical point for centrifugal pumps is always their mechanical seal. These are made in various versions. For chemically aggressive liquids a magnet driven pump is often selected which are hermetically sealed from the atmospere.
 

  • ECO BNM pomp series

    Normalized pumps with stub shaft to DIN 24255 / EN 733 1450/2900 rpm.

    • Max. power: 90 kW
    • Max. capacity: 200 m3/hr
    • Max. capacity: 3333 l/min
    • Max. capacity: 200000 l/hr
    • Max. discharge head: 100 m
    • Max. pressure: 10 bar
    •  

    More information

  • BNM pump series

    Standard pumps with drive shaft compliant with DIN 24255/EN 733 1450/2900 rpm.

    • Max. power: 55 kW
    • Max. capacity: 500 m3/hr
    • Max. capacity: 8333 l/min
    • Max. capacity: 500000 l/hr
    • Max. discharge head: 95 m
    • Max. pressure: 10 bar
    •  

    More information

  • 3S series and 3LS pump series

    Stainless steel AISI 304 and AISI 316 centrifugal pumps compliant with EN 733/DIN 24255 with IEC motor.

    • Max. power: 55 kW
    • Max. capacity: 132 m3/hr
    • Max. capacity: 2200 l/min
    • Max. capacity: 132000 l/hr
    • Max. discharge head: 71 m
    • Max. pressure: 7 bar
    •  

    More information

  • ECO SNT pump series

    Normalized pumps according to DIN 24255 / EN 733 with bearing block on base and B3 motor.

    • Max. power: 110 kW
    • Max. capacity: 600 m3/hr
    • Max. capacity: 10000 l/min
    • Max. capacity: 600000 l/hr
    • Max. discharge head: 100 m
    • Max. pressure: 10 bar
    •  

    More information

  • SNT pump series

    Standard pumps compliant with DIN 24255/EN 733 with bearing unit on base plate and B3 motor.

    • Max. power: 400 kW
    • Max. capacity: 1700 m3/hr
    • Max. capacity: 28333 l/min
    • Max. capacity: 1700000 l/hr
    • Max. discharge head: 100 m
    • Max. pressure: 10 bar
    •  

    More information

  • ECO SNL pump series

    In-line centrifugal pumps with stub shaft.

    • Max. power: 90 kW
    • Max. capacity: 200 m3/hr
    • Max. capacity: 3333 l/min
    • Max. capacity: 200000 l/hr
    • Max. discharge head: 100 m
    • Max. pressure: 10 bar
    •  

    More information

  • A pump series

    Self-priming waste water centrifugal pumps.

    • Max. power: 7,5 kW
    • Max. capacity: 66 m3/hr
    • Max. capacity: 1100 l/min
    • Max. capacity: 66000 l/hr
    • Max. discharge head: 35 m
    • Max. pressure: 4 bar
    • Max. drainage: 15 mm
    • Speed: 2900 rpm
    •  

    More information

  • S pump series Monoblock

    Self-priming monoblock waste water centrifugal pumps.

    • Max. power: 55 kW
    • Max. capacity: 1440 m3/hr
    • Max. capacity: 24000 l/min
    • Max. capacity: 1440000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 80 mm
    •  

    More information

  • S pump series Bi-Block

    Self-priming waste water centrifugal pumps with standard IEC electric motor.

    • Max. power: 55 kW
    • Max. capacity: 1440 m3/hr
    • Max. capacity: 24000 l/min
    • Max. capacity: 1440000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 80 mm
    •  

    More information

  • S  pump series in uncoupled axle

    Self-priming waste water centrifugal pumps with bearing unit in uncoupled axle.

    • Max. power: 55 kW
    • Max. capacity: 1440 m3/hr
    • Max. capacity: 24000 l/min
    • Max. capacity: 1440000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 80 mm
    •  

    More information

  • S pump series Diesel

    Self-priming cast-iron waste water centrifugal pumps with diesel motor.

    • Max. power: 55 kW
    • Max. capacity: 1440 m3/hr
    • Max. capacity: 24000 l/min
    • Max. capacity: 1440000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 80 mm
    •  

    More information

  • RS pump series with recessed impeller

    Stainless steel AISI 316 centrifugal pumps with recessed impeller.

    • Max. power: 15 kW
    • Max. capacity: 90 m3/hr
    • Max. capacity: 1500 l/min
    • Max. capacity: 90000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 40 mm
    •  

    More information

  • RC pump series with recessed impeller

    Centrifugal pumps with recessed impeller.

    • Max. power: 55 kW
    • Max. capacity: 350 m3/hr
    • Max. capacity: 5833 l/min
    • Max. capacity: 350000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 115 mm
    •  

    More information

  • PC pump serie

    Pumps in free shaft version with bearing block on fundation for waste- and processwater.

    • Max. power: 200 kW
    • Max. capacity: 1500 m3/hr
    • Max. capacity: 25000 l/min
    • Max. capacity: 1500000 l/hr
    • Max. discharge head: 95 m
    • Max. pressure: 10 bar
    • Max. drainage: 180 mm
    •  

    More information

  • RB pump series with channel impeller

    Centrifugal pumps with channel impeller.

    • Max. power: 110 kW
    • Max. capacity: 1200 m3/hr
    • Max. capacity: 20000 l/min
    • Max. capacity: 1200000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 40 mm
    •  

    More information

  • ARBO Sealpro pump series

    Horizontal plastic chemical centrifugal pumps with shaft seal.

    • Max. power: 5,5 kW
    • Max. capacity: 45 m3/hr
    • Max. capacity: 750 l/min
    • Max. capacity: 45000 l/hr
    • Max. discharge head: 37 m
    • Max. drainage: 2 mm
    •  

    More information

  • ARBO HD-KR / TK pump series

    Plastic chemical standard centrifugal pumps with shaft seal according to ISO 2858.

    • Max. power: 75 kW
    • Max. capacity: 750 m3/hr
    • Max. capacity: 12500 l/min
    • Max. capacity: 750000 l/hr
    • Max. discharge head: 90 m
    • Max. pressure: 9 bar
    • Max. drainage: 3 mm
    •  

    More information

  • Habermann HPK pump series

    The HPK series with internal lining are used for pumping abrasive / corrosive liquids.

    • Max. capacity: 4600 m3/hr
    • Max. capacity: 76667 l/min
    • Max. capacity: 4600 l/hr
    • Max. discharge head: 70 m
    • Max. pressure: 7 bar
    •  

    More information

  • Habermann NPK pump series

    The NPK series is used for pumping very abrasive liquids.

    • Max. capacity: 4600 m3/hr
    • Max. capacity: 76667 l/min
    • Max. capacity: 4600 l/hr
    • Max. discharge head: 95 m
    • Max. pressure: 9,5 bar
    • Max. drainage: 100 mm
    •  

    More information

  • CR pump series with screw impeller

    Stainless steel AISI 316 sanitary centrifugal pumps with screw impellers.

    • Max. power: 22 kW
    • Max. capacity: 200 m3/hr
    • Max. capacity: 3333 l/min
    • Max. capacity: 200000 l/hr
    • Max. discharge head: 24 m
    • Max. pressure: 2 bar
    • Max. drainage: 63 mm
    •  

    More information

  • DWO pump series

    Centrifugal pumps in stainless steel AISI 304 with open impellers.

    • Max. power: 3 kW
    • Max. capacity: 66 m3/hr
    • Max. capacity: 1100 l/min
    • Max. capacity: 66000 l/hr
    • Max. discharge head: 18 m
    • Max. pressure: 2 bar
    • Max. drainage: 19 mm
    • Speed: 2900 rpm
    •  

    More information

  • C pump series

    Close-coupled centrifugal pumps with open impeller.

    • Max. power: 1,1 kW
    • Max. capacity: 15 m3/hr
    • Max. capacity: 250 l/min
    • Max. capacity: 15000 l/hr
    • Max. discharge head: 22 m
    • Max. pressure: 2 bar
    • Max. drainage: 4 mm
    • Speed: 2900 rpm
    •  

    More information