Centrifugal Pumps

The operating principal of the centrifugal pump is one of the most common principals and can be deployed in situation where thin liquids of up to a viscosity of approx. 300 mPa.s. have to be pumped.

There are many different types of impellers including: closed impellers, half open impellers, entirely open impellers, recessed impellers, peripheral impellers and side entry impellers. Each impeller type has its own specific characteristics.
 

A distinction is also made between standard-priming and self-priming centrifugal pumps. In both cases the impeller must always be below the water level, however, self-priming centrifugal pumps are better for air processing and are often constructed so that liquid remains in the pump house so the pumps can be stationed above the level of the liquid.
 

A critical point for centrifugal pumps is always their mechanical seal. These are made in various versions. For chemically aggressive liquids a magnet driven pump is often selected which are hermetically sealed from the atmospere.
 

  • ECO BNM pomp series

    Normalized pumps with stub shaft to DIN 24255 / EN 733 1450/2900 rpm.

    • Max. power: 90 kW
    • Max. capacity: 200 m3/hr
    • Max. capacity: 3333 l/min
    • Max. capacity: 200000 l/hr
    • Max. discharge head: 100 m
    • Max. pressure: 10 bar
    •  

    More information

  • BNM pump series

    Standard pumps with drive shaft compliant with DIN 24255/EN 733 1450/2900 rpm.

    • Max. power: 55 kW
    • Max. capacity: 500 m3/hr
    • Max. capacity: 8333 l/min
    • Max. capacity: 500000 l/hr
    • Max. discharge head: 95 m
    • Max. pressure: 10 bar
    •  

    More information

  • 3M series and 3LM pump series

    Stainless steel AISI 304 and AISI close-coupled centrifugal pumps compliant with EN 733/DIN 24255.

    • Max. power: 55 kW
    • Max. capacity: 240 m3/hr
    • Max. capacity: 4000 l/min
    • Max. capacity: 240000 l/hr
    • Max. discharge head: 95 m
    • Max. pressure: 10 bar
    • Speed: 2900 rpm
    •  

    More information

  • 3S series and 3LS pump series

    Stainless steel AISI 304 and AISI 316 centrifugal pumps compliant with EN 733/DIN 24255 with IEC motor.

    • Max. power: 55 kW
    • Max. capacity: 132 m3/hr
    • Max. capacity: 2200 l/min
    • Max. capacity: 132000 l/hr
    • Max. discharge head: 71 m
    • Max. pressure: 7 bar
    •  

    More information

  • ECO SNT pump series

    Normalized pumps according to DIN 24255 / EN 733 with bearing block on base and B3 motor.

    • Max. power: 110 kW
    • Max. capacity: 600 m3/hr
    • Max. capacity: 10000 l/min
    • Max. capacity: 600000 l/hr
    • Max. discharge head: 100 m
    • Max. pressure: 10 bar
    •  

    More information

  • MXV series 25-2, 32-4, 40-8 pump

    Vertical multi-stage centrifugal pumps with standard motors.

    • Max. power: 7,5 kW
    • Max. capacity: 13 m3/hr
    • Max. capacity: 217 l/min
    • Max. capacity: 13000 l/hr
    • Max. discharge head: 225 m
    • Max. pressure: 23 bar
    •  

    More information

  • MXV pump series 50-15, 50-20, 65-32 en 80-48

    Vertical multi-stage centrifugal pumps with standard motors.

    • Max. power: 45 kW
    • Max. capacity: 85 m3/hr
    • Max. capacity: 1417 l/min
    • Max. capacity: 85000 l/hr
    • Max. discharge head: 275 m
    • Max. pressure: 28 bar
    •  

    More information

  • MXV pump series AISI 316

    Vertical multi-stage centrifugal pumps in stainless steel AISI 316L with standard motors.

    • Max. power: 22 kW
    • Max. capacity: 60 m3/hr
    • Max. capacity: 1000 l/min
    • Max. capacity: 60000 l/hr
    • Max. discharge head: 245 m
    • Max. pressure: 25 bar
    •  

    More information

  • EVMS pump series

    Vertical multi-stage centrifugal pumps with normalized motors.

    • Max. power: 18,5 kW
    • Max. capacity: 100 m3/hr
    • Max. capacity: 1666,67 l/min
    • Max. capacity: 100000 l/hr
    • Max. discharge head: 300 m
    • Max. pressure: 30 bar
    •  

    More information

  • SKM-E pump series

    Horizontal multistage centrifugal pumps with closed impellers.

    • Max. power: 200 kW
    • Max. capacity: 400 m3/hr
    • Max. capacity: 6667 l/min
    • Max. capacity: 400000 l/hr
    • Max. discharge head: 390 m
    • Max. pressure: 39 bar
    •  

    More information

  • SKM pump series

    Horizontal multistage centrifugal pumps with closed impellers.

    • Max. power: 1400 kW
    • Max. capacity: 1000 m3/hr
    • Max. capacity: 16667 l/min
    • Max. capacity: 1000000 l/hr
    • Max. discharge head: 400 m
    • Max. pressure: 40 bar
    •  

    More information

  • RS pump series with recessed impeller

    Stainless steel AISI 316 centrifugal pumps with recessed impeller.

    • Max. power: 15 kW
    • Max. capacity: 90 m3/hr
    • Max. capacity: 1500 l/min
    • Max. capacity: 90000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 40 mm
    •  

    More information

  • RC pump series with recessed impeller

    Centrifugal pumps with recessed impeller.

    • Max. power: 55 kW
    • Max. capacity: 350 m3/hr
    • Max. capacity: 5833 l/min
    • Max. capacity: 350000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 115 mm
    •  

    More information

  • ARBO Sealpro pump series

    Horizontal plastic chemical centrifugal pumps with shaft seal.

    • Max. power: 5,5 kW
    • Max. capacity: 45 m3/hr
    • Max. capacity: 750 l/min
    • Max. capacity: 45000 l/hr
    • Max. discharge head: 37 m
    • Max. drainage: 2 mm
    •  

    More information

  • ARBO HD-KR / TK pump series

    Plastic chemical standard centrifugal pumps with shaft seal according to ISO 2858.

    • Max. power: 75 kW
    • Max. capacity: 750 m3/hr
    • Max. capacity: 12500 l/min
    • Max. capacity: 750000 l/hr
    • Max. discharge head: 90 m
    • Max. pressure: 9 bar
    • Max. drainage: 3 mm
    •  

    More information

  • CP pump series

    Stainless steel AISI 316 Peripheral impeller pump.

    • Max. power: 4 kW
    • Max. capacity: 6 m3/hr
    • Max. capacity: 100 l/min
    • Max. capacity: 6000 l/hr
    • Max. discharge head: 77 m
    • Speed: 2900 rpm
    •  

    More information

  • CV pump series

    Stainless steel AISI 316 multi-stage high pressure centrifugal pumps.

    • Max. power: 25 kW
    • Max. capacity: 100 m3/hr
    • Max. capacity: 1667 l/min
    • Max. capacity: 100000 l/hr
    • Max. discharge head: 80 m
    • Max. pressure: 8 bar
    • Speed: 2900 rpm
    •  

    More information

  • CN serie

    Stainless steel hygienic centrifugalpumps with open impeller

    • Max. capacity: 75 m3/hr
    • Max. capacity: 1250 l/min
    • Max. capacity: 75000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    •  

    More information

  • CNH pump series

    Stainless steel AISI 316 selfpriming centrifugalpumps with open impeller.

    • Max. capacity: 60 m3/hr
    • Max. capacity: 1000 l/min
    • Max. capacity: 60000 l/hr
    • Max. discharge head: 70 m
    • Max. pressure: 7 bar
    •  

    More information

  • CLC pump series

    Stainless steel AISI 316 sanitary centrifugal pumps with closed impellers.

    • Max. power: 15 kW
    • Max. capacity: 90 m3/hr
    • Max. capacity: 1500 l/min
    • Max. capacity: 90000 l/hr
    • Max. discharge head: 50 m
    • Max. pressure: 5 bar
    •  

    More information

  • CS pump series

    Centrifugal pumps are used for pumping low-viscosity, neutral or corrosive fluids

    • Max. power: 37 kW
    • Max. capacity: 330 m3/hr
    • Max. capacity: 5500 l/min
    • Max. capacity: 330000 l/hr
    • Max. discharge head: 100 m
    • Max. pressure: 10 bar
    •  

    More information

  • CSK pump series

    Stainless steel AISI 316 sanitary centrifugal pumps with open impellers and bearing unit.

    • Max. power: 37 kW
    • Max. capacity: 560 m3/hr
    • Max. capacity: 9333 l/min
    • Max. capacity: 560000 l/hr
    • Max. discharge head: 100 m
    • Max. pressure: 10 bar
    •  

    More information

  • CR pump series with screw impeller

    Stainless steel AISI 316 sanitary centrifugal pumps with screw impellers.

    • Max. power: 22 kW
    • Max. capacity: 200 m3/hr
    • Max. capacity: 3333 l/min
    • Max. capacity: 200000 l/hr
    • Max. discharge head: 24 m
    • Max. pressure: 2 bar
    • Max. drainage: 63 mm
    •  

    More information

  • CSM pump series

    Stainless steel AISI 316 multi-stage high pressure centrifugal pumps.

    • Max. power: 37 kW
    • Max. capacity: 140 m3/hr
    • Max. capacity: 2333 l/min
    • Max. capacity: 140000 l/hr
    • Max. discharge head: 155 m
    • Max. pressure: 16 bar
    • Speed: 2900 rpm
    •  

    More information