Centrifugal Pumps

The operating principal of the centrifugal pump is one of the most common principals and can be deployed in situation where thin liquids of up to a viscosity of approx. 300 mPa.s. have to be pumped.

There are many different types of impellers including: closed impellers, half open impellers, entirely open impellers, recessed impellers, peripheral impellers and side entry impellers. Each impeller type has its own specific characteristics.
 

A distinction is also made between standard-priming and self-priming centrifugal pumps. In both cases the impeller must always be below the water level, however, self-priming centrifugal pumps are better for air processing and are often constructed so that liquid remains in the pump house so the pumps can be stationed above the level of the liquid.
 

A critical point for centrifugal pumps is always their mechanical seal. These are made in various versions. For chemically aggressive liquids a magnet driven pump is often selected which are hermetically sealed from the atmospere.
 

  • ECO BNM pomp series

    Normalized pumps with stub shaft to DIN 24255 / EN 733 1450/2900 rpm.

    • Max. power: 90 kW
    • Max. capacity: 200 m3/hr
    • Max. capacity: 3333 l/min
    • Max. capacity: 200000 l/hr
    • Max. discharge head: 100 m
    • Max. pressure: 10 bar
    •  

    More information

  • BNM pump series

    Standard pumps with drive shaft compliant with DIN 24255/EN 733 1450/2900 rpm.

    • Max. power: 55 kW
    • Max. capacity: 500 m3/hr
    • Max. capacity: 8333 l/min
    • Max. capacity: 500000 l/hr
    • Max. discharge head: 95 m
    • Max. pressure: 10 bar
    •  

    More information

  • ECO SNT pump series

    Normalized pumps according to DIN 24255 / EN 733 with bearing block on base and B3 motor.

    • Max. power: 110 kW
    • Max. capacity: 600 m3/hr
    • Max. capacity: 10000 l/min
    • Max. capacity: 600000 l/hr
    • Max. discharge head: 100 m
    • Max. pressure: 10 bar
    •  

    More information

  • MXV series 25-2, 32-4, 40-8 pump

    Vertical multi-stage centrifugal pumps with standard motors.

    • Max. power: 7,5 kW
    • Max. capacity: 13 m3/hr
    • Max. capacity: 217 l/min
    • Max. capacity: 13000 l/hr
    • Max. discharge head: 225 m
    • Max. pressure: 23 bar
    •  

    More information

  • MXV pump series 50-15, 50-20, 65-32 en 80-48

    Vertical multi-stage centrifugal pumps with standard motors.

    • Max. power: 45 kW
    • Max. capacity: 85 m3/hr
    • Max. capacity: 1417 l/min
    • Max. capacity: 85000 l/hr
    • Max. discharge head: 275 m
    • Max. pressure: 28 bar
    •  

    More information

  • RC pump series with recessed impeller

    Centrifugal pumps with recessed impeller.

    • Max. power: 55 kW
    • Max. capacity: 350 m3/hr
    • Max. capacity: 5833 l/min
    • Max. capacity: 350000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 115 mm
    •  

    More information

  • PC pump serie

    Pumps in free shaft version with bearing block on fundation for waste- and processwater.

    • Max. power: 200 kW
    • Max. capacity: 1500 m3/hr
    • Max. capacity: 25000 l/min
    • Max. capacity: 1500000 l/hr
    • Max. discharge head: 95 m
    • Max. pressure: 10 bar
    • Max. drainage: 180 mm
    •  

    More information