Centrifugal Pumps

The operating principal of the centrifugal pump is one of the most common principals and can be deployed in situation where thin liquids of up to a viscosity of approx. 300 mPa.s. have to be pumped.

There are many different types of impellers including: closed impellers, half open impellers, entirely open impellers, recessed impellers, peripheral impellers and side entry impellers. Each impeller type has its own specific characteristics.
 

A distinction is also made between standard-priming and self-priming centrifugal pumps. In both cases the impeller must always be below the water level, however, self-priming centrifugal pumps are better for air processing and are often constructed so that liquid remains in the pump house so the pumps can be stationed above the level of the liquid.
 

A critical point for centrifugal pumps is always their mechanical seal. These are made in various versions. For chemically aggressive liquids a magnet driven pump is often selected which are hermetically sealed from the atmospere.
 

  • ECO BNM pomp series

    Normalized pumps with stub shaft to DIN 24255 / EN 733 1450/2900 rpm.

    • Max. power: 90 kW
    • Max. capacity: 200 m3/hr
    • Max. capacity: 3333 l/min
    • Max. capacity: 200000 l/hr
    • Max. discharge head: 100 m
    • Max. pressure: 10 bar
    •  

    More information

  • BNM pump series

    Standard pumps with drive shaft compliant with DIN 24255/EN 733 1450/2900 rpm.

    • Max. power: 55 kW
    • Max. capacity: 500 m3/hr
    • Max. capacity: 8333 l/min
    • Max. capacity: 500000 l/hr
    • Max. discharge head: 95 m
    • Max. pressure: 10 bar
    •  

    More information

  • 3M series and 3LM pump series

    Stainless steel AISI 304 and AISI close-coupled centrifugal pumps compliant with EN 733/DIN 24255.

    • Max. power: 55 kW
    • Max. capacity: 240 m3/hr
    • Max. capacity: 4000 l/min
    • Max. capacity: 240000 l/hr
    • Max. discharge head: 95 m
    • Max. pressure: 10 bar
    • Speed: 2900 rpm
    •  

    More information

  • 3M4 series and 3LM4 pump series

    Stainless steel AISI 304 and AISI close-coupled centrifugal pumps compliant with EN 733/DIN 24255.

    • Max. power: 7,5 kW
    • Max. capacity: 132 m3/hr
    • Max. capacity: 2200 l/min
    • Max. capacity: 132000 l/hr
    • Max. discharge head: 24,5 m
    • Max. pressure: 2 bar
    • Speed: 1450 rpm
    •  

    More information

  • 3S series and 3LS pump series

    Stainless steel AISI 304 and AISI 316 centrifugal pumps compliant with EN 733/DIN 24255 with IEC motor.

    • Max. power: 55 kW
    • Max. capacity: 132 m3/hr
    • Max. capacity: 2200 l/min
    • Max. capacity: 132000 l/hr
    • Max. discharge head: 71 m
    • Max. pressure: 7 bar
    •  

    More information

  • ECO SNT pump series

    Normalized pumps according to DIN 24255 / EN 733 with bearing block on base and B3 motor.

    • Max. power: 110 kW
    • Max. capacity: 600 m3/hr
    • Max. capacity: 10000 l/min
    • Max. capacity: 600000 l/hr
    • Max. discharge head: 100 m
    • Max. pressure: 10 bar
    •  

    More information

  • SNT pump series

    Standard pumps compliant with DIN 24255/EN 733 with bearing unit on base plate and B3 motor.

    • Max. power: 400 kW
    • Max. capacity: 1700 m3/hr
    • Max. capacity: 28333 l/min
    • Max. capacity: 1700000 l/hr
    • Max. discharge head: 100 m
    • Max. pressure: 10 bar
    •  

    More information

  • 3P series and 3LP pump series

    Stainless steel AISI 304 and AISI 316 centrifugal pumps with bearing unit compliant with EN 733/DIN 24255.

    • Max. power: 22 kW
    • Max. capacity: 132 m3/hr
    • Max. capacity: 2200 l/min
    • Max. capacity: 132000 l/hr
    • Max. discharge head: 71 m
    • Max. pressure: 7 bar
    •  

    More information

  • SNMV-H pump serie

    Vertical centrifugal pumps.

    • Max. power: 150 kW
    • Max. capacity: 1400 m3/hr
    • Max. capacity: 28333 l/min
    • Max. capacity: 1700000 l/hr
    • Max. discharge head: 100 m
    • Max. pressure: 10 bar
    •  

    More information

  • SDS pump series

    Horizontal split case pump.

    • Max. power: 2500 kW
    • Max. capacity: 3500 m3/hr
    • Max. capacity: 58333 l/min
    • Max. capacity: 3500000 l/hr
    • Max. discharge head: 240 m
    • Max. pressure: 24 bar
    •  

    More information

  • ECO SNL pump series

    In-line centrifugal pumps with stub shaft.

    • Max. power: 90 kW
    • Max. capacity: 200 m3/hr
    • Max. capacity: 3333 l/min
    • Max. capacity: 200000 l/hr
    • Max. discharge head: 100 m
    • Max. pressure: 10 bar
    •  

    More information

  • SNL pump series

    In line centrifugal pumps with drive shaft.

    • Max. power: 110 kW
    • Max. capacity: 500 m3/hr
    • Max. capacity: 8333 l/min
    • Max. capacity: 500000 l/hr
    • Max. discharge head: 95 m
    • Max. pressure: 10 bar
    •  

    More information

  • SNLV-H pump serie

    In-line centrifugaalpumps with integrated bearing block.

    • Max. power: 75 kW
    • Max. capacity: 800 m3/hr
    • Max. capacity: 13333 l/min
    • Max. capacity: 800000 l/hr
    • Max. discharge head: 95 m
    • Max. pressure: 10 bar
    •  

    More information

  • MVX-B pump series

    Vertical multi-stage close-coupled centrifugal pumps.

    • Max. power: 7,5 kW
    • Max. capacity: 25 m3/hr
    • Max. capacity: 417 l/min
    • Max. capacity: 25000 l/hr
    • Max. discharge head: 120 m
    • Max. pressure: 12 bar
    • Speed: 2900 rpm
    •  

    More information

  • MXV pump series AISI 316

    Vertical multi-stage centrifugal pumps in stainless steel AISI 316L with standard motors.

    • Max. power: 22 kW
    • Max. capacity: 60 m3/hr
    • Max. capacity: 1000 l/min
    • Max. capacity: 60000 l/hr
    • Max. discharge head: 245 m
    • Max. pressure: 25 bar
    •  

    More information

  • EVMS pump series

    Vertical multi-stage centrifugal pumps with normalized motors.

    • Max. power: 18,5 kW
    • Max. capacity: 100 m3/hr
    • Max. capacity: 1666,67 l/min
    • Max. capacity: 100000 l/hr
    • Max. discharge head: 300 m
    • Max. pressure: 30 bar
    •  

    More information

  • SKMV-H pump series

    High pressure vertical multi-stage centrifugal pumps with bearing unit in cast version.

    • Max. power: 75 kW
    • Max. capacity: 400 m3/hr
    • Max. capacity: 6667 l/min
    • Max. capacity: 400000 l/hr
    • Max. discharge head: 350 m
    • Max. pressure: 35 bar
    •  

    More information

  • SKM-E pump series

    Horizontal multistage centrifugal pumps with closed impellers.

    • Max. power: 200 kW
    • Max. capacity: 400 m3/hr
    • Max. capacity: 6667 l/min
    • Max. capacity: 400000 l/hr
    • Max. discharge head: 390 m
    • Max. pressure: 39 bar
    •  

    More information

  • SKM-K pump series

    Horizontal multistage centrifugal pumps with closed impellers.

    • Max. power: 900 kW
    • Max. capacity: 700 m3/hr
    • Max. capacity: 11667 l/min
    • Max. capacity: 700000 l/hr
    • Max. discharge head: 560 m
    • Max. pressure: 56 bar
    •  

    More information

  • SKM pump series

    Horizontal multistage centrifugal pumps with closed impellers.

    • Max. power: 1400 kW
    • Max. capacity: 1000 m3/hr
    • Max. capacity: 16667 l/min
    • Max. capacity: 1000000 l/hr
    • Max. discharge head: 400 m
    • Max. pressure: 40 bar
    •  

    More information

  • S pump series Monoblock

    Self-priming monoblock waste water centrifugal pumps.

    • Max. power: 55 kW
    • Max. capacity: 1440 m3/hr
    • Max. capacity: 24000 l/min
    • Max. capacity: 1440000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 80 mm
    •  

    More information

  • S pump series Bi-Block

    Self-priming waste water centrifugal pumps with standard IEC electric motor.

    • Max. power: 55 kW
    • Max. capacity: 1440 m3/hr
    • Max. capacity: 24000 l/min
    • Max. capacity: 1440000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 80 mm
    •  

    More information

  • S  pump series in uncoupled axle

    Self-priming waste water centrifugal pumps with bearing unit in uncoupled axle.

    • Max. power: 55 kW
    • Max. capacity: 1440 m3/hr
    • Max. capacity: 24000 l/min
    • Max. capacity: 1440000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 80 mm
    •  

    More information

  • S pump series Diesel

    Self-priming cast-iron waste water centrifugal pumps with diesel motor.

    • Max. power: 55 kW
    • Max. capacity: 1440 m3/hr
    • Max. capacity: 24000 l/min
    • Max. capacity: 1440000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 80 mm
    •  

    More information

  • RS pump series with recessed impeller

    Stainless steel AISI 316 centrifugal pumps with recessed impeller.

    • Max. power: 15 kW
    • Max. capacity: 90 m3/hr
    • Max. capacity: 1500 l/min
    • Max. capacity: 90000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 40 mm
    •  

    More information

  • HG pump series with open impeller

    Stainless steel AISI 316 centrifugal pumps with open impeller.

    • Max. power: 55 kW
    • Max. capacity: 250 m3/hr
    • Max. capacity: 4167 l/min
    • Max. capacity: 250000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    •  

    More information

  • HD pump series with closed impeller

    Stainless steel AISI 316 centrifugal pumps with closed impeller.

    • Max. power: 55 kW
    • Max. capacity: 250 m3/hr
    • Max. capacity: 4167 l/min
    • Max. capacity: 250000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    •  

    More information

  • RC pump series with recessed impeller

    Centrifugal pumps with recessed impeller.

    • Max. power: 55 kW
    • Max. capacity: 350 m3/hr
    • Max. capacity: 5833 l/min
    • Max. capacity: 350000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 115 mm
    •  

    More information

  • PC pump serie

    Pumps in free shaft version with bearing block on fundation for waste- and processwater.

    • Max. power: 200 kW
    • Max. capacity: 1500 m3/hr
    • Max. capacity: 25000 l/min
    • Max. capacity: 1500000 l/hr
    • Max. discharge head: 95 m
    • Max. pressure: 10 bar
    • Max. drainage: 180 mm
    •  

    More information

  • RB pump series with channel impeller

    Centrifugal pumps with channel impeller.

    • Max. power: 110 kW
    • Max. capacity: 1200 m3/hr
    • Max. capacity: 20000 l/min
    • Max. capacity: 1200000 l/hr
    • Max. discharge head: 60 m
    • Max. pressure: 6 bar
    • Max. drainage: 40 mm
    •  

    More information

  • CM MAG-M pump series

    Magnetic drive metal centrifugal pumps.

    • Max. power: 5,5 kW
    • Max. capacity: 35 m3/hr
    • Max. capacity: 583 l/min
    • Max. capacity: 35000 l/hr
    • Max. discharge head: 35 m
    • Max. pressure: 4 bar
    •  

    More information

  • T MAG-M pump series

    Magnet-driven, metal centrifugal pumps with a peripheral impeller.

    • Max. power: 30 kW
    • Max. capacity: 12 m3/hr
    • Max. capacity: 200 l/min
    • Max. capacity: 12000 l/hr
    • Max. discharge head: 164 m
    • Max. pressure: 16 bar
    • Speed: 2900 rpm
    •  

    More information

  • CT MAG-M pump series

    Magnetic drive metal centrifugal pumps with peripheral impeller.

    • Max. power: 75 kW
    • Max. capacity: 25 m3/hr
    • Max. capacity: 417 l/min
    • Max. capacity: 25000 l/hr
    • Max. discharge head: 310 m
    • Max. pressure: 31 bar
    •  

    More information