Submersible pump

Submersible pumps are used mainly for pumping waste water in sumps, water purification installations and cellars.

Submersible pumps are equipped with an integrated electric motor that is cooled by the liquid the pump is standing in. This means that the temperature of the liquid must usually not be higher than 40°C. For liquids with higher temperatures, one of our cantilever pumps would be a better choice, as these use air cooled electric motors that are fixed above the liquid level, or an entirely dry stationed pump.


Bedu Pumps offers you a very wide and diverse range of submersible pumps, for both clean and (heavily) polluted waste water. You can make your selection from various impeller types including a half open impeller, a recessed impeller, a closed 1 or 2 channel impeller, a half open channel impeller, a screw channel impeller or a cutting pump. You can also choose the type of material the pump is made of - from synthetics, cast iron, bronze, stainless steel AISI 304, stainless steel AISI 316 or even special alloys.


Besides the pump we can supply all the accessories you need to assemble the pump in a professional way. This might include a foot clutch, guidance system, hauling chains, non-return valves and a control panel with various types of level controls. Of course, we also deliver complete sumps in concrete or PE which we can install at your location and get working for you. For more information please look at the product category: Waste water installations.
 

  • Jung U3K series

    Plastic submersible pump for drainage water.

    • Max. power: 0,2 kW
    • Max. capacity: 6,3 m3/hr
    • Max. capacity: 105 l/min
    • Max. capacity: 6300 l/hr
    • Max. discharge head: 7 m
    • Max. pressure: 1 bar
    • Max. drainage: 10 mm
    • Speed: 2900 rpm
    •  

    More information

  • Jung U3K Spezial

    The U3K Spezial submersible pumps are ideal for pumping aggressive liquids.

    • Max. power: 0,2 kW
    • Max. capacity: 6,5 m3/hr
    • Max. capacity: 108 l/min
    • Max. capacity: 6500 l/hr
    • Max. discharge head: 7 m
    • Max. pressure: 1 bar
    •  

    More information

  • DPC series

    Synthetic submersible pumps that can drain to a water level of up to 3 mm.

    • Max. power: 0,65 kW
    • Max. capacity: 9 m3/hr
    • Max. capacity: 150 l/min
    • Max. capacity: 9000 l/hr
    • Max. discharge head: 9,5 m
    • Max. pressure: 1 bar
    • Speed: 2900 rpm
    •  

    More information

  • Jung U5K series

    Plastic submersible pump for drainage water.

    • Max. power: 0,38 kW
    • Max. capacity: 11,5 m3/hr
    • Max. capacity: 192 l/min
    • Max. capacity: 11500 l/hr
    • Max. discharge head: 8 m
    • Max. pressure: 1 bar
    • Max. drainage: 10 mm
    • Speed: 2900 rpm
    •  

    More information

  • Zenit GRS series

    Cast-iron submersible pumps with external maceration unit..

    • Max. power: 0,9 kW
    • Max. capacity: 14,4 m3/hr
    • Max. capacity: 240 l/min
    • Max. capacity: 14400 l/hr
    • Max. discharge head: 20 m
    • Max. pressure: 2 bar
    •  

    More information

  • Jung U6K series

    Plastic submersible pump for drainage water.

    • Max. power: 0,6 kW
    • Max. capacity: 17 m3/hr
    • Max. capacity: 283 l/min
    • Max. capacity: 17000 l/hr
    • Max. discharge head: 9 m
    • Max. pressure: 1 bar
    • Max. drainage: 10 mm
    • Speed: 2900 rpm
    •  

    More information

  • Zenit APS series

    Cast-iron high pressure submersible pumps for drainage water.

    • Max. power: 0,9 kW
    • Max. capacity: 18 m3/hr
    • Max. capacity: 300 l/min
    • Max. capacity: 18000 l/hr
    • Max. discharge head: 20 m
    • Max. pressure: 2 bar
    • Speed: 2900 rpm
    •  

    More information

  • GWN series

    Special magnetic drive pumps for corrosive liquids.

    • Max. capacity: 19 m3/hr
    • Max. capacity: 317 l/min
    • Max. capacity: 19000 l/hr
    • Max. discharge head: 12 m
    • Max. pressure: 1 bar
    •  

    More information

  • Zenit DR Steel serie

    Stainless steel AISI 304 submersible pumps for drainage water.

    • Max. power: 0,75 kW
    • Max. capacity: 20 m3/hr
    • Max. capacity: 333 l/min
    • Max. capacity: 20000 l/hr
    • Max. discharge head: 16 m
    • Max. pressure: 2 bar
    • Max. drainage: 12 mm
    • Speed: 2900 rpm
    •  

    More information

  • Zenit GR BluePro serie

    Cast iron grinder submersiblepump for wastewater.

    • Max. power: 1,5 kW
    • Max. capacity: 20,1 m3/hr
    • Max. capacity: 335 l/min
    • Max. capacity: 20100 l/hr
    • Max. discharge head: 27 m
    • Max. pressure: 3 bar
    • Speed: 2900 rpm
    •  

    More information

  • Zenit GRF series

    Cast-iron explosion-proof submersible pumps with external maceration.

    • Max. power: 1,5 kW
    • Max. capacity: 22 m3/hr
    • Max. capacity: 367 l/min
    • Max. capacity: 22000 l/hr
    • Max. discharge head: 23 m
    • Max. pressure: 2 bar
    •  

    More information

  • Zenit DG Steel serie

    Submersible pumps with top outlet and recessed impeller.

    • Max. power: 0,75 kW
    • Max. capacity: 22,5 m3/hr
    • Max. capacity: 375 l/min
    • Max. capacity: 22500 l/hr
    • Max. discharge head: 10 m
    • Max. pressure: 1 bar
    • Max. drainage: 40 mm
    • Speed: 2900 rpm
    •  

    More information

  • Zenit AP BluePro (HP) serie

    Cast iron submersible pumps for drainage / clean water.

    • Max. power: 1,5 kW
    • Max. capacity: 25,5 m3/hr
    • Max. capacity: 425 l/min
    • Max. capacity: 25500 l/hr
    • Max. discharge head: 26,6 m
    • Max. pressure: 3 bar
    • Speed: 2900 rpm
    •  

    More information

  • Zenit GRP series

    Cast-iron submersible pumps with external maceration unit.

    • Max. power: 7,2 kW
    • Max. capacity: 27 m3/hr
    • Max. capacity: 450 l/min
    • Max. capacity: 27000 l/hr
    • Max. discharge head: 53 m
    • Max. pressure: 5 bar
    •  

    More information

  • Zenit APF series

    Cast-iron explosion-proof hgh pressure submersible pumps.

    • Max. power: 1,5 kW
    • Max. capacity: 27,5 m3/hr
    • Max. capacity: 458 l/min
    • Max. capacity: 27500 l/hr
    • Max. discharge head: 22,5 m
    • Max. pressure: 2 bar
    • Speed: 2900 rpm
    •  

    More information

  • Jung US 73/103 H/HE

    Submersible pumps, ideal for hot waste water to 90øC, with a dirt filter of 30 mm.

    • Max. power: 0,98 kW
    • Max. capacity: 28 m3/hr
    • Max. capacity: 467 l/min
    • Max. capacity: 28000 l/hr
    • Max. discharge head: 12 m
    • Max. pressure: 1 bar
    • Max. drainage: 30 mm
    • Speed: 2900 rpm
    •  

    More information

  • Zenit GREY - GRG series

    Cast-iron submersible pumps with external cutting mechanism.

    • Max. power: 9 kW
    • Max. capacity: 30 m3/hr
    •  

    More information

  • Zenit APE series

    Cast-iron high pressure submersible pumps for drainage water.

    • Max. power: 1,5 kW
    • Max. capacity: 35 m3/hr
    • Max. capacity: 583 l/min
    • Max. capacity: 35000 l/hr
    • Max. discharge head: 28 m
    • Max. pressure: 3 bar
    • Speed: 2900 rpm
    •  

    More information

  • Zenit APN series

    Cast-iron high pressure submersible pumps.

    • Max. power: 4,1 kW
    • Max. capacity: 36 m3/hr
    • Max. capacity: 600 l/min
    • Max. capacity: 36000 l/hr
    • Max. discharge head: 38 m
    • Max. pressure: 4 bar
    • Speed: 2900 rpm
    •  

    More information

  • Jung Multidrain UV 600

    Drainage submersible pumps for high pressure.

    • Max. capacity: 38 m3/hr
    • Max. discharge head: 25 m
    • Max. drainage: 10 mm
    • Speed: 2900 rpm
    •  

    More information

  • Zenit GREY - APG series

    Cast iron high pressure submersible pumps.

    • Max. power: 9 kW
    • Max. capacity: 38 m3/hr
    • Max. discharge head: 52 m
    • Max. drainage: 10 mm
    •  

    More information

  • Zenit DR BluePro serie

    Cast iron submersible pumps for drainage water.

    • Max. power: 1,5 kW
    • Max. capacity: 41,4 m3/hr
    • Max. capacity: 690 l/min
    • Max. capacity: 41400 l/hr
    • Max. discharge head: 17 m
    • Max. pressure: 2 bar
    • Max. drainage: 15 mm
    • Speed: 2900 rpm
    •  

    More information

  • Zenit DRB series

    Bronze submersible pumps for drainage water.

    • Max. power: 1,5 kW
    • Max. capacity: 43 m3/hr
    • Max. capacity: 717 l/min
    • Max. capacity: 43000 l/hr
    • Max. discharge head: 18 m
    • Max. pressure: 2 bar
    •  

    More information

  • Zenit DRX series

    Stainless steel AISI 316 submersible pumps for drainage water..

    • Max. power: 1,5 kW
    • Max. capacity: 43 m3/hr
    • Max. capacity: 717 l/min
    • Max. capacity: 43000 l/hr
    • Max. discharge head: 18 m
    • Max. pressure: 2 bar
    •  

    More information

  • Zenit DG BluePro serie

    Cast iron with recessed impeller submersible pumps for dirty water.

    • Max. power: 1,5 kW
    • Max. capacity: 45 m3/hr
    • Max. capacity: 750 l/min
    • Max. capacity: 45000 l/hr
    • Max. discharge head: 15,3 m
    • Max. pressure: 2 bar
    • Max. drainage: 50 mm
    • Speed: 2900 rpm
    •  

    More information

  • Zenit DRO series

    Cast-iron submersible pumps for drainage water.

    • Max. power: 1,5 kW
    • Max. capacity: 46 m3/hr
    • Max. capacity: 767 l/min
    • Max. capacity: 46000 l/hr
    • Max. discharge head: 18 m
    • Max. pressure: 2 bar
    •  

    More information

  • Zenit SMF series

    Cast-iron explosion-proof submersible pumps with closed channel impeller.

    • Max. power: 1,5 kW
    • Max. capacity: 47 m3/hr
    • Max. capacity: 783 l/min
    • Max. capacity: 47000 l/hr
    • Max. discharge head: 16 m
    • Max. pressure: 2 bar
    • Max. drainage: 48 mm
    •  

    More information

  • Zenit APP series

    Cast-iron high pressure submersible pumps.

    • Max. power: 10 kW
    • Max. capacity: 48 m3/hr
    • Max. capacity: 800 l/min
    • Max. capacity: 48000 l/hr
    • Max. discharge head: 58 m
    • Max. pressure: 6 bar
    • Speed: 2900 rpm
    •  

    More information

  • Zenit MAI series

    Cast-iron submersible pumps with half-open channel impeller for waste water.

    • Max. power: 0,74 kW
    • Max. capacity: 50 m3/hr
    • Max. capacity: 833 l/min
    • Max. capacity: 50000 l/hr
    • Max. discharge head: 7 m
    • Max. pressure: 1 bar
    • Max. drainage: 70 mm
    •  

    More information

  • Zenit DGB series

    Bronze submersible pumps with recessed impeller.

    • Max. power: 1,5 kW
    • Max. capacity: 54 m3/hr
    • Max. capacity: 900 l/min
    • Max. capacity: 54000 l/hr
    • Max. discharge head: 15 m
    • Max. pressure: 2 bar
    • Max. drainage: 38 mm
    •  

    More information

  • Zenit DGO series

    Cast-iron submersible pumps with recessed impeller for waste water.

    • Max. power: 1,5 kW
    • Max. capacity: 54 m3/hr
    • Max. capacity: 900 l/min
    • Max. capacity: 54000 l/hr
    • Max. discharge head: 15 m
    • Max. pressure: 2 bar
    • Max. drainage: 60 mm
    •  

    More information

  • Zenit DGX series

    Stainless steel AISI 316 submersible pumps with recessed impeller for waste water.

    • Max. power: 1,5 kW
    • Max. capacity: 54 m3/hr
    • Max. capacity: 900 l/min
    • Max. capacity: 54000 l/hr
    • Max. discharge head: 15 m
    • Max. pressure: 2 bar
    • Max. drainage: 38 mm
    •  

    More information

  • Zenit DGF series

    Cast-iron explosion-proof submersible pumps with recessed impeller.

    • Max. power: 1,5 kW
    • Max. capacity: 57 m3/hr
    • Max. capacity: 950 l/min
    • Max. capacity: 57000 l/hr
    • Max. discharge head: 17 m
    • Max. pressure: 2 bar
    • Max. drainage: 80 mm
    •  

    More information