Centrifugal Pumps
The operating principal of the centrifugal pump is one of the most common principals and can be deployed in situation where thin liquids of up to a viscosity of approx. 300 mPa.s. have to be pumped.
There are many different types of impellers including: closed impellers, half open impellers, entirely open impellers, recessed impellers, peripheral impellers and side entry impellers. Each impeller type has its own specific characteristics.
A distinction is also made between standard-priming and self-priming centrifugal pumps. In both cases the impeller must always be below the water level, however, self-priming centrifugal pumps are better for air processing and are often constructed so that liquid remains in the pump house so the pumps can be stationed above the level of the liquid.
A critical point for centrifugal pumps is always their mechanical seal. These are made in various versions. For chemically aggressive liquids a magnet driven pump is often selected which are hermetically sealed from the atmospere.
Self-priming waste water centrifugal pumps with bearing unit in uncoupled axle.
- Max. power: 55 kW
- Max. capacity: 1440 m3/hr
- Max. capacity: 24000 l/min
- Max. capacity: 1440000 l/hr
- Max. discharge head: 60 m
- Max. pressure: 6 bar
- Max. drainage: 80 mm
Self-priming cast-iron waste water centrifugal pumps with diesel motor.
- Max. power: 55 kW
- Max. capacity: 1440 m3/hr
- Max. capacity: 24000 l/min
- Max. capacity: 1440000 l/hr
- Max. discharge head: 60 m
- Max. pressure: 6 bar
- Max. drainage: 80 mm
Stainless steel AISI 316 centrifugal pumps with recessed impeller.
- Max. power: 15 kW
- Max. capacity: 90 m3/hr
- Max. capacity: 1500 l/min
- Max. capacity: 90000 l/hr
- Max. discharge head: 60 m
- Max. pressure: 6 bar
- Max. drainage: 40 mm
Stainless steel AISI 316 centrifugal pumps with open impeller.
- Max. power: 55 kW
- Max. capacity: 250 m3/hr
- Max. capacity: 4167 l/min
- Max. capacity: 250000 l/hr
- Max. discharge head: 60 m
- Max. pressure: 6 bar
Stainless steel AISI 316 centrifugal pumps with closed impeller.
- Max. power: 55 kW
- Max. capacity: 250 m3/hr
- Max. capacity: 4167 l/min
- Max. capacity: 250000 l/hr
- Max. discharge head: 60 m
- Max. pressure: 6 bar
Centrifugal pumps with recessed impeller.
- Max. power: 55 kW
- Max. capacity: 350 m3/hr
- Max. capacity: 5833 l/min
- Max. capacity: 350000 l/hr
- Max. discharge head: 60 m
- Max. pressure: 6 bar
- Max. drainage: 115 mm
Pumps in free shaft version with bearing block on fundation for waste- and processwater.
- Max. power: 200 kW
- Max. capacity: 1500 m3/hr
- Max. capacity: 25000 l/min
- Max. capacity: 1500000 l/hr
- Max. discharge head: 95 m
- Max. pressure: 10 bar
- Max. drainage: 180 mm
Centrifugal pumps with channel impeller.
- Max. power: 110 kW
- Max. capacity: 1200 m3/hr
- Max. capacity: 20000 l/min
- Max. capacity: 1200000 l/hr
- Max. discharge head: 60 m
- Max. pressure: 6 bar
- Max. drainage: 40 mm
Stainless steel AISI 316 centrifugal pumps with open impeller for chemical applications compliant with DIN 24256/ ISO 2858.
- Max. power: 75 kW
- Max. capacity: 300 m3/hr
- Max. capacity: 5000 l/min
- Max. capacity: 300000 l/hr
- Max. discharge head: 100 m
- Max. pressure: 10 bar
Magnetic drive synthetic centrifugal pumps.
- Max. power: 4 kW
- Max. capacity: 35 m3/hr
- Max. capacity: 583 l/min
- Max. capacity: 35000 l/hr
- Max. discharge head: 24 m
- Max. pressure: 2 bar
Magnetic drive metal centrifugal pumps.
- Max. power: 5,5 kW
- Max. capacity: 35 m3/hr
- Max. capacity: 583 l/min
- Max. capacity: 35000 l/hr
- Max. discharge head: 35 m
- Max. pressure: 4 bar
Magnet driven centrifugal pumps with a plastic lining.
- Max. power: 18,5 kW
- Max. capacity: 130 m3/hr
- Max. capacity: 1500 l/min
- Max. capacity: 90000 l/hr
- Max. discharge head: 44 m
- Max. pressure: 4 bar
- Speed: 2900 rpm
Magnet driven centrifugal pumps with a plastic lining.
- Max. power: 15 kW
- Max. capacity: 90 m3/hr
- Max. capacity: 1500 l/min
- Max. capacity: 90000 l/hr
- Max. discharge head: 63 m
- Max. pressure: 6 bar
- Speed: 2900 rpm
Self-priming plastic magnetic drive centrifugal pumps.
- Max. power: 3,7 kW
- Max. capacity: 27 m3/hr
- Max. capacity: 450 l/min
- Max. capacity: 27000 l/hr
- Max. discharge head: 26 m
- Max. pressure: 3 bar
Horizontal plastic chemical centrifugal pumps with shaft seal.
- Max. power: 5,5 kW
- Max. capacity: 45 m3/hr
- Max. capacity: 750 l/min
- Max. capacity: 45000 l/hr
- Max. discharge head: 37 m
- Max. drainage: 2 mm
Plastic chemical standard centrifugal pumps with shaft seal according to ISO 2858.
- Max. power: 75 kW
- Max. capacity: 750 m3/hr
- Max. capacity: 12500 l/min
- Max. capacity: 750000 l/hr
- Max. discharge head: 90 m
- Max. pressure: 9 bar
- Max. drainage: 3 mm
Centrifugal pumps with plastic lining follow ISO 2858 -. ISO 5199 Mechanical seal chamber according to ISO 3069 / UNI EN 12756.
- Max. power: 75 kW
- Max. capacity: 340 m3/hr
- Max. capacity: 5667 l/min
- Max. capacity: 340000 l/hr
- Max. discharge head: 86 m
- Max. pressure: 9 bar
Magnet-driven plastic centrifugal pumps with a peripheral impeller.
- Max. power: 9,2 kW
- Max. capacity: 13 m3/hr
- Max. capacity: 217 l/min
- Max. capacity: 13000 l/hr
- Max. discharge head: 53 m
- Max. pressure: 5 bar
Magnet-driven plastic centrifugal pumps with a peripheral fan.
- Max. power: 5,5 kW
- Max. capacity: 13 m3/hr
- Max. capacity: 217 l/min
- Max. capacity: 13000 l/hr
- Max. discharge head: 53 m
- Max. pressure: 5 bar
- Speed: 2900 rpm
Magnet-driven, metal centrifugal pumps with a peripheral impeller.
- Max. power: 30 kW
- Max. capacity: 12 m3/hr
- Max. capacity: 200 l/min
- Max. capacity: 12000 l/hr
- Max. discharge head: 164 m
- Max. pressure: 16 bar
- Speed: 2900 rpm
Magnetic drive metal centrifugal pumps with peripheral impeller.
- Max. power: 75 kW
- Max. capacity: 25 m3/hr
- Max. capacity: 417 l/min
- Max. capacity: 25000 l/hr
- Max. discharge head: 310 m
- Max. pressure: 31 bar
Chemical process pumps that comply with EN 22858 / ISO 2858.
- Max. power: 500 kW
- Max. capacity: 1800 m3/hr
- Max. capacity: 10000 l/min
- Max. capacity: 600000 l/hr
- Max. discharge head: 170 m
- Max. pressure: 17 bar
Magnetic drive metal centrifugal pumps compliant with ISO 2858/DIN 24256.
- Max. power: 1000 kW
- Max. capacity: 900 m3/hr
- Max. capacity: 15000 l/min
- Max. capacity: 900000 l/hr
- Max. discharge head: 150 m
- Max. pressure: 15 bar
Magnetic drive metal centrifugal pumps compliant with API 685.
- Max. power: 320 kW
- Max. capacity: 1000 m3/hr
- Max. capacity: 16667 l/min
- Max. capacity: 1000000 l/hr
- Max. discharge head: 220 m
- Max. pressure: 22 bar
The HPK series with internal lining are used for pumping abrasive / corrosive liquids.
- Max. capacity: 4600 m3/hr
- Max. capacity: 76667 l/min
- Max. capacity: 4600 l/hr
- Max. discharge head: 70 m
- Max. pressure: 7 bar
The NPK series is used for pumping very abrasive liquids.
- Max. capacity: 4600 m3/hr
- Max. capacity: 76667 l/min
- Max. capacity: 4600 l/hr
- Max. discharge head: 95 m
- Max. pressure: 9,5 bar
- Max. drainage: 100 mm
Pumps specially for industrial sludge applications.
- Max. capacity: 4600 m3/hr
- Max. capacity: 76,666 l/min
- Max. capacity: 4600 l/hr
- Max. discharge head: 70 m
- Max. pressure: 7 bar
Thermal oil pumps with bearing unit on base plate and B3 motor.
- Max. power: 110 kW
- Max. capacity: 500 m3/hr
- Max. capacity: 8333 l/min
- Max. capacity: 500000 l/hr
- Max. discharge head: 105 m
- Max. pressure: 10 bar
Stainless steel AISI 316 Peripheral impeller pump.
- Max. power: 4 kW
- Max. capacity: 6 m3/hr
- Max. capacity: 100 l/min
- Max. capacity: 6000 l/hr
- Max. discharge head: 77 m
- Speed: 2900 rpm
Stainless steel AISI 316 multi-stage high pressure centrifugal pumps.
- Max. power: 25 kW
- Max. capacity: 100 m3/hr
- Max. capacity: 1667 l/min
- Max. capacity: 100000 l/hr
- Max. discharge head: 80 m
- Max. pressure: 8 bar
- Speed: 2900 rpm
Stainless steel hygienic centrifugalpumps with open impeller
- Max. capacity: 75 m3/hr
- Max. capacity: 1250 l/min
- Max. capacity: 75000 l/hr
- Max. discharge head: 60 m
- Max. pressure: 6 bar
Stainless steel AISI 316 selfpriming centrifugalpumps with open impeller.
- Max. capacity: 60 m3/hr
- Max. capacity: 1000 l/min
- Max. capacity: 60000 l/hr
- Max. discharge head: 70 m
- Max. pressure: 7 bar
Stainless steel AISI 316 sanitary centrifugal pumps with closed impellers.
- Max. power: 15 kW
- Max. capacity: 90 m3/hr
- Max. capacity: 1500 l/min
- Max. capacity: 90000 l/hr
- Max. discharge head: 50 m
- Max. pressure: 5 bar
Vind de juiste pomp met onze pompselector
Op zoek naar de juiste capaciteit of maximale temperatuur, op basis materiaal of van een bepaald medium? Door het invullen van de pompselector, kunt u de juiste pompen voor uw toepassing vinden.
Naar pompselectieRefine by type
Refine by material
Refine by application
- Tankcleaning
- Animal feed
- Biogas plants
- Boiler feed and condensate
- Chemicals
- Cocoa mass and cocoa butter
- Food industry
- Gas and air scrubbers
- Industrial wastewater and wastewater treatment
- Loading and unloading trucks
- Machine and equipment construction (OEM)
- Meat processing industry
- Paper and cardboard industry
- Petrochemistry
- Pharmaceuticals
- Potato processing industry
- Process and cooling water
- Reversed Osmosis (RO)
- Shipping and dredging industry
- Slaughterhouses
- Surface treatment
- Thermal oil